DS90LV031ATMTCX

The DS90LV031ATMTCX is an integrated, high-speed transceiver for Fiber Channel and Gigabit Ethernet applications. It is a single chip device that combines the functionality of a transceiver, receiver and driver. It is capable of transmitting and receiving data at rates up to 2.5 Gbps. The device operates over a wide temperature range and is pin for pin compatible with the DS90LV031ATMTCTCX.

The DS90LV031ATMTCX provides the important functions needed in high-speed serial data communication systems such as data encoding, retiming, deskew and idle-code insertion/removal. It also supports a variety of data formats, including bus-oriented formats such as low-voltage differential signaling (LVDS) and quad data rate (QDR) signaling. The device supports both single-ended logic levels and differential logic levels.

The DS90LV031ATMTCX is designed for a variety of serial data applications, such as Fibre Channel and Gigabit Ethernet. The device supports hardware or software-based flow control, allowing it to be used in high-speed data communications systems where medium-level flow control is required. The device supports features such as Auto-Negotiation, Error Detection and Correction, Automatic Data Retiming and CRC (Cyclic Redundancy Check) inspection.

The DS90LV031ATMTCX has two types of data outputs, a pored (7V-13V) VDDIOECL output for CML data and a pored (1.65V-5V) VDDIOECL for LVDS data. Both of these outputs can operate at a rate of up to 2.5 Gbps. The device supports both half-duplex and full-duplex operation and supports multipoint communication with up to eight ports. It has two unidirectional transmitters and two unidirectional receivers, providing four data lines in total. The device also supports auto-polarity detection, allowing it to recognize which end is sending and receiving the data.

The DS90LV031ATMTCX is designed to be used in a variety of applications. It is suitable for high-speed serial communication systems, such as Fibre Channel, server-to-switch/server-to-server and board-to-board/shelf-to-shelf communication. It is also suitable for low power applications. The device is offered in a small QFN-16 package and is available in commercial, industrial and extreme temperature range grades.

In summary, the DS90LV031ATMTCX is an integrated, high-speed transceiver for Fiber Channel and Gigabit Ethernet applications. It is capable of transmitting and receiving data at rates up to 2.5 Gbps, and supports a variety of data formats, including LVDS and QDR. The device has two types of outputs, pored VDDIOECL and pored VDDIOECL, and supports both full and half duplex operations. It is offered in a small, QFN-16 package, and is suitable for a variety of applications.