DSC1001AI5-125.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that produce a periodic signal waveform, often using the concept of “resonance”. Oscillators are commonly used in many electronic applications, including radio transmitters and receivers, radar systems, high speed telecommunication systems, and as control systems for optical and mechanical systems. The DSC1001AI5-125.0000T is one such oscillator.

Description of DSC1001AI5-125.0000T

The DSC1001AI5-125.0000T is a highly stable oscillator that produces a clock signal from an external reference such as a crystal, where the DSC1001AI5-125.0000T is phase locked to the reference and will produce an extremely accurate output signal. This oscillator operates in the frequency range of 0.1 MHz to 125 MHz, with a wide range of options available.

Application Fields

The DSC1001AI5-125.0000T is widely used in many different domains, including telecommunications, radio, and computers. In telecommunications the DSC1001AI5-125.0000T is used in optical networks, cellular networks, microwave radio communications, fiber optic links, and local area networks. In radio, the DSC1001AI5-125.0000T is used in commercial radio broadcasts, amateur radio broadcasting, radar, and satellite communications. Finally, the DSC1001AI5-125.0000T is used in computers as a part of the clock circuitry, as well as in the control of various other functions. The DSC1001AI5-125.0000T is also used to sync data across a network.

Working Principle

The DSC1001AI5-125.0000T oscillator operates by using an external reference signal, usually a quartz or ceramic crystal oscillator, as it’s source of synchronization. The external reference frequency range must be within one-half of the frequency range of the DSC1001AI5-125.0000T. The DSC1001AI5-125.0000T then produces a very stable, accurate signal based on the reference signal. The frequency of the DSC1001AI5-125.0000T can be adjusted via its various control pins and its output is typically set equal to the reference frequency.

The output of the DSC1001AI5-125.0000T oscillator is typically a square wave, although other waveforms are available upon request. The output of the DSC1001AI5-125.0000T is usually passed through a low pass filter to reduce harmonic content and noise. The output of the oscillator is also usually driven via an amplifier to obtain a specified voltage level for the end application.

The DSC1001AI5-125.0000T oscillator is a very stable and reliable device and has been used in various applications for many years. It is a cost effective solution for generating a highly accurate output signal, and is often used in place of more expensive crystal oscillators.

The specific data is subject to PDF, and the above content is for reference