DSC1001BI1-010.0000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	6.3mA
Operating Temperature:	-40°C ~ 85°C
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	10MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are commonly used in many applications and come in many shapes and varieties. One such example is the DSC1001BI1-010.0000 oscillator. This oscillator provides a highly reliable, wide range of frequencies, and is a small, economical component with a variety of applications.The DSC1001BI1-010.0000 oscillator is a voltage-controlled oscillator (VCO) that is offered in four variants. These four variants, all of which operate differently, are as follows:CMOS - This variant operates at a much higher frequency range and is capable of reaching frequencies as high as 2500MHz. It is also used for high-speed data communication applications and other applications dealing with highly precise measurements.PECL - This variant can reach frequencies of up to 400MHz and is typically used for data communication applications, clocks, and other precise applications.LVDS - This variant can reach frequencies of up to 400MHz and is typically used for data communication applications, complex clock signals, and other active signal conditioning applications.LVCMOS - This variant can reach frequencies of up to 200MHz and is typically used for consumer applications, low-noise applications, low-cost systems, and low-cost applications.DSC1001BI1-010.0000 oscillator’s working principle can be summarized as follows. An oscillator generates a continuous output voltage that is proportional to the input voltage. The input voltage can be an AC or DC voltage and can be externally adjusted via an external control voltage (ECV). The output signal frequency is determined by the magnitude of the external control voltage. This signal frequency can be adjusted by changing the ECV or by adjusting any other external circuit components.The DSC1001BI1-010.0000 oscillator has many applications. The most common application is in data communication where it can be used to generate periodic clock signals for synchronizing transmitter/receiver data communication. It is also commonly used to generate square waves for digital circuits. In addition, this oscillator can be used in RF and optical systems for WLAN, Wi-Fi, and signal tracking applications.The DSC1001BI1-010.0000 oscillator is also widely used in timing applications. Such applications include precision time-keeping in clocks, frequency division for clock synchronization, and time-interval measurement. In addition, it is also used for the generation of signal pulses and switching of digital logic circuits.Oscillators are critical components in many electronic systems since their output frequencies are crucial for the system’s performance. The DSC1001BI1-010.0000 oscillator is a robust, reliable, and economical component that is well-suited for various applications. Thanks to its wide range of frequencies, its highly precise and consistent output, and its small size, it is the perfect choice for all kinds of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description