DSC1001BL5-030.0000

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	7.1mA
Operating Temperature:	-40°C ~ 105°C
Absolute Pull Range (APR):	--
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	30MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

An oscillator is an electronic circuit that produces a repeating waveform, oscillating at a frequency determined by its component values. Oscillators are used in a wide variety of applications, from electronic watches and radio transmitters to car radios and cell phones. The DSC1001BL5-030.0000, in particular, has a variety of applications.

Applications of DSC1001BL5-030.0000

The DSC1001BL5-030.0000 is a full-featured oscillator used primarily in the consumer electronics, automotive, medical, and defense industries. It is highly reliable and typically used for clock generation, frequency conversion, and motor drive applications. It is widely used in these industries thanks to its low power consumption, small size, and cost-effectiveness.

Features of DSC1001BL5-030.0000

The features of the DSC1001BL5-030.0000 are what make it so popular with manufacturers. The oscillator has a wide frequency range of 2.4 – 30MHz, and a supply voltage of 3V to 5V. It also has a very low current consumption of only 5µA, and high accuracy and stability over a wide temperature range.

Working Principle of DSC1001BL5-030.0000

The DSC1001BL5-030.0000 works by generating an oscillating signal at a determined frequency. This is accomplished through its on-chip circuit which uses a combination of inductance and capacitance. The oscillator begins by charging the capacitors, which produces a current. This current then flows through the inductors, producing an electromagnetic field. This field then collapses and creates a current which then flows back through the inductors, generating an oscillating electromagnetic field. This field then induces a current in the circuit, resulting in an oscillating signal.

Conclusion

The DSC1001BL5-030.0000 is a highly reliable and popular oscillator used in many different industries, thanks to its low power consumption, small size, and cost-effectiveness. It is used primarily for clock generation, frequency conversion, and motor drive applications, and works by generating an oscillating signal at a determined frequency. Its features, including a wide frequency range of 2.4–30MHz and low current consumption, make it an ideal choice for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description