DSC1001BL5-049.5000T

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	7.1mA
Operating Temperature:	-40°C ~ 105°C
Absolute Pull Range (APR):	--
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	49.5MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

OSCILLATORS are frequency sources that produce a wave with a fixed frequency and amplitude. Oscillators are used in various applications such as signal processing, test and measurement, radio communications, control systems and robotics. The most commonly used type is the signal generator, followed by digital frequency synthesizers, oscillator circuits and other types.The DSC1001BL5-049.5000T oscillator is a widely used device designed to generate a stable analog signal to drive other circuits. It has a frequency of 49.500 MHz and a noise level of -95 dBc/Hz. The device is housed in a 10-pin SMD package with an operating temperature range of -40°C to 125°C.The DSC1001BL5-049.5000T oscillator is a voltage-controlled oscillator (VCO) with a wide tuning range of up to 5.5GHz. It offers a high performance in both low and high frequency applications. The device has a fast settling time and is available in a wide selection of output frequencies and amplitudes. The device can be used in various IoT applications, such as Wi-Fi, Bluetooth, Zigbee, and RFID.The working principle of the device is based on the principle of a voltage controlled oscillator. This oscillator works on a basic principle that a voltage applied across the varactor diode in the circuit will control the frequency of the generated signal. This voltage is called the oscillator control voltage (OCV). The OCV is set at a certain level and the frequency is then generated according to that. The frequency output is dependent on the level of the OCV. The device is usually connected to an external oscillator circuit or other devices that require an oscillating signal. Typically, the device is used as a reference source for radio communication applications. It is also used in a variety of radio frequency applications such as ADS-B receivers or GSM systems.The device is also often used in high frequency applications such as frequency hopping spread spectrum (FHSS) or direct sequence spread spectrum (DSSS) systems. It is also used in control systems and robotics where a stable frequency is required.The device is made up of an oscillator crystal, a temperature controller, a voltage regulator and an amplifier. The amplifier is used to increase the amplitude of the generated signal. The crystal provides the oscillating frequency and is usually made from quartz, which is temperature stable and has an extremely low temperature drift. The temperature controller helps to maintain a stable temperature to ensure that the oscillator frequency is not affected by changes in the external temperature. The voltage regulator is used to ensure that the oscillator control voltage is set correctly and is not affected by changes in the external voltage.The DSC1001BL5-049.5000T oscillator can be used in a variety of applications such as wireless communication, radio systems, control systems and robotics. It is a high performance device that offers excellent stability and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description