DSC1001CI5-060.0000

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	7.2mA
Operating Temperature:	-40°C ~ 85°C
Series:	DSC1001
Voltage - Supply:	1.7 V ~ 3.6 V
Output:	CMOS
Function:	Enable/Disable
Frequency:	60MHz
Type:	MEMS (Silicon)
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: DSC1001CI5-060.0000Oscillators are vital components in a variety of electronic circuits. They store energy and convert it into a steady oscillating signal. The DSC1001CI5-060.0000 is a type of oscillator, specifically a crystal oscillator, and its application field and working principle will be discussed in this article.A crystal oscillator is a type of circuit that generates an AC signal with a precise frequency. It consists of a quartz crystal, an amplifier, and a frequency control circuit. The quartz crystal is typically cut in a symmetrical shape and typically produces a signal with a frequency of about 32kHz. The crystal is connected to the amplifier and its output is used to drive a frequency control circuit, which produces a signal with a precise frequency.The DSC1001CI5-060.0000 crystal oscillator is a high-performance, low-cost quartz oscillator designed for applications that require precision timing and a low jitter. It is a high-gain device that can produce a signal with a frequency of up to 999,999 Hz. It is designed to provide a very wide range of frequencies and to work with a wide variety of devices, including microcontrollers, programmable logic controllers (PLCs) and digital signal processors (DSPs).The DSC1001CI5-060.0000 is designed for a variety of applications, including frequency synthesis, signal generation, frequency tracking, clock/data recovery and communication networks. It is ideal for use in embedded systems, industrial control systems, medical systems and telecommunications systems.The working principle of a crystal oscillator is relatively simple. When a voltage is applied to the crystal, it creates an electric field that causes the crystal to vibrate at a certain frequency. This frequency is determined by the size and shape of the crystal, and is controlled by the voltage applied to it. The electric field created by the voltage causes the crystal to vibrate at its resonant frequency, and the vibration is amplified and converted into an electric signal.The oscillator then produces a steady stream of output which is dependant on the input voltage. As the voltage is increased, the oscillator produces a higher frequency. The frequency can also be adjusted to a certain extent by the external components. The frequency of the oscillator is usually adjusted by the frequency control circuit, which typically consists of capacitors and resistors.The DSC1001CI5-060.0000 crystal oscillator is a highly precise and reliable device that is designed for applications that require highly accurate timing and low jitter. Its wide range of frequencies and low jitter make it an ideal choice for a wide range of applications, including microcontrollers, programmable logic controllers (PLCs) and digital signal processors (DSPs).

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description