DSC1001CL5-100.0000T

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	8.7mA
Operating Temperature:	-40°C ~ 105°C
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: DSC1001CL5-100.0000T Application Field and Working Principle

Oscillators are electronic devices that generate a repetitive alternating current signal of an AC waveform. As such, they are used in a wide variety of applications, including alarm systems, audio equipment, digital devices, medical instruments, and even electronic toys. The specific type of oscillator that we will be discussing is the DSC1001CL5-100.0000T.

1. DSC1001CL5-100.0000T Application Field

This particular oscillator is most commonly used for mobile communications, such as cell phone and satellite communications. It is also used in a variety of other applications, such as medical devices, industrial applications, automotive applications, and even consumer electronics.The advantage of using this oscillator is that it offers low power consumption, high stability, and good performance. Additionally, it is capable of generating a high frequency waveform with low Noise. This makes it ideal for use in mobile communication systems, which require precise transmit and receive signals.

2. DSC1001CL5-100.0000T Working Principle

The working principle of the DSC1001CL5-100.0000T is based on its unique circuit topology. This circuit is based on a pair of j-fet (junction fieldEmitter transistor) devices. The j-fets are configured in an action -reaction configuration, where one j-fet is used to amplify a signal while the other is used to drive the amplification circuit. This enables the oscillator to produce a consistent sinusoidal waveform with very high frequencies.In order to achieve the desired frequency, the feedback loop of the oscillator must be precisely tuned. The loop includes a loop capacitor, a feedback resistor, and a gate resistance. Depending on the application, the values of these components can be modified in order to fine tune the signal frequency. The frequency of the signal is determined by the value of the loop capacitor. The greater the value of the capacitor, the lower the frequency of the signal will be. Conversely, the smaller the value of the capacitor, the higher the frequency of the signal will be. The capacitor value is adjusted to achieve the desired frequency. The feedback resistor and the gate resistance form a resistance divider. The feedback resistor determines the gain of the circuit and the gate resistance acts as a current limiter. By adjusting the values of these components, the gain is adjusted to achieve the desired frequency of operation.

3. Conclusion

The DSC1001CL5-100.0000T oscillator is a popular choice for many applications, due to its low power consumption, high stability, and good performance. It is especially useful for mobile communication applications, due to its ability to generate a sinusoidal, high-frequency waveform with low noise. By adjusting the values of its feedback loop components, the desired frequency of operation can be achieved.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description