DSC1001DC1-004.9152

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	6.3mA
Operating Temperature:	0°C ~ 70°C
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	4.9152MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DSC1001DC1-004.9152 is an oscillator that falls within the same family of control elements as the other oscillators produced by the same manufacturer. It has become increasingly popular as its versatility and cost-effectiveness have made it an attractive purchase option for many consumers. This article will explore the application field and working principle of this specific oscillator.

Application Field

The DSC1001DC1-004.9152 is a highly versatile oscillator that is suitable for a wide variety of applications. It has a wide range of frequency output, ranging from 32KHz to 150MHz; this makes it applicable to many applications in the communication, instrumentation, motion control, and automotive industries. Additionally, it is capable of providing both sine and square output, further expanding its potential applications.Due to the fact that the oscillator has an adjustable frequency, it is highly suitable for use in devices that require the generation of a signal at an irregular rate. Some of its potential uses include motor speed controllers, power supplies, vending machines, remote control radios, and even alarm systems.

Working Principle

The DSC1001DC1-004.9152 oscillator works on the principle of cross-coupled logic. This means that two inverters are present within the device, and their outputs are connected to each other. The signal is then fed back to the input to create a continuous oscillation, which is then converted to the desired output waveform. The main components of the oscillator are a resistor network, a capacitor, and two inverters.The resistor network is used to adjust and set the frequency of the oscillator. The capacitor is used as a low-pass filter, which prevents the output signal from becoming too distorted. Finally, the two inverters are used to convert the input signal into an alternating one.

Conclusion

The DSC1001DC1-004.9152 is an oscillator that has become increasingly popular due to its versatility and cost-effectiveness. It is capable of providing both sine and square output, and it also has a wide range of frequency output, ranging from 32KHz to 150MHz; this makes it applicable to many applications in the communication, instrumentation, motion control, and automotive industries. The oscillator works on the principle of cross-coupled logic, which works by connecting two inverters to each other and then feeding the resulting signal back to the input to create a continuous oscillation. The main components of the noise generator are a resistor network, a capacitor, and two inverters. In conclusion, the DSC1001DC1-004.9152 is a highly versatile oscillator that is suitable for a wide variety of applications across several industries. Its cost-effectiveness and user-adjustable frequency output make it an attractive option for many consumers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description