DSC1001DE1-018.4320

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are typically utilized in the field of control and communications technology for creating a regular repetitive signal, often containing both sine and cosine waves of the same frequency and of slightly different amplitude. In the case of DSC1001DE1-018.4320, the application field and working principle is quite similar to other kinds of oscillators with one important difference – its high accuracy and low power consumption.

Application Field

DSC1001DE1-018.4320 is a low power oscillator that can be found in a variety of different applications, including:

• Non-volatile memory devices
• Metering, monitoring, and data processing systems
• Communication systems
• Automobile electronics
• PC peripheral devices and computer systems

Due to its versatility and low power consumption, the DSC1001DE1-018.4320 can be used in a variety of digital and analog systems including microcontroller-based systems, embedded systems and other applications that require accurate timing. It is especially suitable for battery-powered devices.

Working Principle

DSC1001DE1-018.4320 is a double transimpedance amplifier used as an oscillator circuit. The circuit consists of two parts: an amplifier section and an oscillator section. The amplifier section consists of an operational amplifier (OP-AMP) and two feedback resistors. The oscillator section consists of a voltage-controlled oscillator (VCO) and a capacitor that forms a RC low-pass filter. The OP-AMP amplifies the input signal and feeds it to the VCO. The VCO is the main oscillator, as it determines the circuit frequency. The capacitor acts as a low-pass filter, removing high frequencies from the output signal.

In addition, a resistor is used for adjusting the frequency of the oscillator. This can be done either manually or electronically. By increasing or decreasing the resistance of the resistor, the frequency of the oscillator can be adjusted. This allows the circuit to be tuned to specific frequencies in order to meet the frequency requirements of different applications.

The output of the oscillator is a sine-wave signal with a frequency that is determined by the resistance of the resistor. The output voltage level of the oscillator can be adjusted by changing the resistor value. The frequency range of the oscillator can be adjusted from 1 MHz to 18.4320 MHz.

Conclusion

The DSC1001DE1-018.4320 Oscillator is an efficient and cost-effective solution for applications that require accurate timing and low power consumption. It utilizes a double transimpedance amplifier as an oscillator circuit with a resistor that can be used to tune the frequency range of the oscillator from 1 MHz to 18.4320 MHz. The output of the oscillator is a sine-wave signal with a frequency and output voltage level that can be adjusted to meet the needs of different applications.

The specific data is subject to PDF, and the above content is for reference