DSC1033DI1-033.0000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	1µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3mA (Typ)
Operating Temperature:	-40°C ~ 85°C
Series:	DSC1033
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	33MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are components that generate alternating voltage or current signals at a set frequency. This is accomplished through the use of an oscillating circuit, which uses a combination of capacitors, resistors, and inductors that can be configured to generate a signal at a set frequency. An oscillating signal is an electrical sine wave that continuously alternates between two states. One state is called the “positive” or “high” state, where the current or voltage is at its maximum potential. The other state is called the “negative” or “low” state, where the current or voltage is at its minimum level. These alternating states occur at a predefined rate and this rate is referred to as the frequency of the oscillating signal.One example of an oscillator is the DSC1033DI1-033.0000. This oscillator is used to generate alternating signals with a frequency of 0.33 MHz (megahertz). It contains an oscillating circuit composed of a capacitor, a resistor, and an inductor. It also has a control circuit which adjusts the amplification of the signal output, as well as regulating the frequency of the oscillation.Application FieldThe DSC1033DI1-033.0000 oscillator is commonly used in digital systems such as digital radio receivers. This oscillator provides a stable output signal which is used to lock the receiver to the transmitted signal from the radio station. It works in conjunction with other electronics components in order to accurately reproduce the audio from the radio station. Other applications for the DSC1033DI1-033.0000 include audio amplifiers, pulse-width modulated (PWM) circuits, and frequency-dividers.Working PrincipleThe DSC1033DI1-033.0000 is able to generate an alternating output signal through the oscillation of the circuit it contains. The capacitor is charged and discharged in alternating states, and the resistor and inductor are configured in such a way that the capacitor can not maintain its current state for a long duration. As a result, the capacitor is repeatedly charged and discharged in an alternating manner, producing an oscillating output signal. The frequency of the signal is determined by the values of the resistor and inductor as well as the capacity of the capacitor. The control circuit adjusts the amplifier gain and regulates the frequency of the output signal.ConclusionThe DSC1033DI1-033.0000 is a type of oscillator that is used to generate alternating signals with a frequency of 0.33MHz. It consists of an oscillating circuit composed of a capacitor, a resistor, and an inductor, as well as a control circuit that adjusts the amplifier gain and regulates the frequency of the output signal. This oscillator can be used in a variety of applications such as digital radios, audio amplifiers, PWM circuits, and frequency-dividers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description