DSC1101DL2-050.6880

Oscillators

Oscillators are electronic circuits that generate repeating waveforms, typically with the use of an amplifier. They are used in a variety of applications, from timing electronics in computers to audio in amplifiers and musical instruments. An example of an oscillator is the DSC1101DL2-050.6880. This article will describe its application field and working principle.

Application Field

The DSC1101DL2-050.6880 oscillator is typically used in a wide range of commercial, consumer, and military applications. It is ideal for timing / synchronization functions and is usually used with high-performance, low-power microprocessors. It has a frequency range of 8 MHz - 50 MHz, and its high-efficiency clock outputs can be easily adjusted to suit different operating requirements. The two-wire serial port in the oscillator supports SPI protocol and other external device communication, enabling it to be easily integrated into other systems.

Working Principle

The DSC1101DL2-050.6880 oscillator is an electronic oscillator circuit with an integrated high-performance amplifier. It works by producing a periodic output signal - an alternating current - with a specific frequency determined by the device’s input circuitry. The integrated high-performance amplifier amplifies the signal, allowing for a more powerful output. The device also uses an on-chip voltage-controlled oscillator (VCO) loop to maintain stable and accurate frequency with small drift levels.

The oscillator is designed to provide high-stability of output frequency and low jitter while consuming low power. It utilizes a low-power, low-noise 20-bit phase-locked loop (PLL) frequency synthesizer and a 4-bit digital-to-analog converter (DAC) that can be programmed to adjust the output frequency range. The device is built in an ultra-small 154-pin, 11mm x 11mm TQFN package, and comes with an optional SOIC8 package.

In summary, the DSC1101DL2-050.6880 oscillator is designed for timing and synchronization use, and is used in a variety of commercial, consumer, and military applications. It works by producing a periodic signal with an integrated high-performance amplifier, low-noise frequency synthesizer, and a 4-bit DAC that can be programmed to adjust the output frequency range. This device is built in an ultra-small 154-pin, 11mm x 11mm TQFN package, and comes with an optional SOIC8 package. The low power consumption, low jitter, and high stability make it an ideal choice for various applications.