DSC1103DI5-360.0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices or circuits that create an electrical signal with a specific frequency. Oscillators can be primarily divided into two categories. One are known as amplitude modulated oscillators, and the other as phase modulated oscillators. The DSC1103DI5-360.0000 oscillator falls into the latter category.

The working principle of the DSC1103DI5-360.0000 oscillator lies in its use of one or more quartz crystal resonators. Quartz crystal resonators, which contain a material that is specifically engineered and cut with specific angles and cut planes, vibrate at very specific frequencies when they receive an electrical current. An oscillator can then be tuned so that it passes a series of frequencies and amplitudes required for it to provide a signal of the desired frequency.

The DSC1103DI5-360.0000 oscillator is designed primarily for use in oscillator-based clock applications. To this end, it provides an accurate high frequency signal, capable of generating both amplitude and phase modulated digital signals. Its design also ensures it can reproduce waveforms, such as square waves, at the same frequency for an extended period of time. Given that it is often used in applications that require an accurate timing signal, such as digital clock chips or digital watch components, the DSC1103DI5-360.0000 oscillator is designed to run at very low power levels, allowing it to be used in battery-powered devices.

In clock chip applications, for example, the DSC1103DI5-360.0000 oscillator is used to control the digital circuitry needed to accurately measure time. Its frequency is constant, and it creates a signal with a period of 1/f c, where 1/f c is the desired frequency to be measured. For digital watch components, the DSC1103DI5-360.0000 oscillator is often used to count down the seconds, minutes, and hours by counting the periods of the signal it emits.

Given its design and its precision, the DSC1103DI5-360.0000 oscillator is suitable for use in a variety of applications, not only in digital watches but also in cellular phones, clocks, and other low-power devices. In addition, because of its ability to produce noise-free digital signals, it can also be used in radio applications or other control systems.

In summary, the DSC1103DI5-360.0000 oscillator is a low-power oscillator, specially designed for generating accurate and stable frequency signals. It makes use of quartz crystal resonators to produce signals of specific amplitude and phase. The oscillator is utilized primarily for clock and watch components, although it can also be used in a variety of other applications.

The specific data is subject to PDF, and the above content is for reference