DSC1121AI1-025.0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate repetitive signals, which can be time-based signals or signals with a certain frequency. One specific oscillator, DSC1121AI1-025.0000, is a type of voltage-controlled oscillator (VCO) that can generate electrical signals with frequency values in between 10 MHz to 25 MHz. This article will discuss the characteristics and application fields of the VCO, as well as its working principle.

Characteristics

The DSC1121AI1-025.0000 is equipped with standard features, such as a wide frequency operating range, programmable frequency, good linearity, and low power consumption. The wide frequency range makes it more suitable for different applications. It also has excellent temperature and voltage stability, and its frequency can be adjusted over a wide range of voltage and temperature levels, based on customer needs.

Application fields

The DSC1121AI1-025.0000 is applicable in a variety of areas, including communication systems, test and measurement equipment, medical devices, and audio processing devices. It is commonly used in radio frequency (RF) applications, such as in modems, GPS receivers, and wireless local area networks (WLAN). It can also be used for producing test signals in consumer electronics, audio amplifiers, power amplifiers, and tuned circuits.

Working principle

Just like any other type of VCO, the working principle of the DSC1121AI1-025.0000 is to produce and sustain oscillations at a certain frequency. The oscillation frequency is determined by a combination of design parameters, including the device\'s internal capacitors and inductors. When an external voltage is applied to the VCO\'s control pin, its frequency can be adjusted in order to allow for the generation of a wider range of frequencies.

The frequency of oscillation of the DSC1121AI1-025.0000 is also dependent on the stability of the external voltage supplied to the control pin. The total current through the device is a combination of reactive power and an active component. The active component is a signal current, while the reactive component is a power current. The total current needs to remain stable in order to keep the oscillation frequency stable.

The DSC1121AI1-025.0000 utilises a logarithmic amplifier to amplify the narrowband signal and provide a voltage output proportional to its frequency. It is equipped with an oscillator and a voltage control block, which are connected in series. When the VCO is powered up, an oscillation signal is produced and it is amplified by the logarithmic amplifier. The voltage output from the logarithmic amplifier is fed back into the voltage control block. This feedback loop ensures that the oscillation frequency of the VCO remains stable.

Conclusion

The DSC1121AI1-025.0000 is a voltage-controlled oscillator designed for applications requiring frequencies between 10 MHz and 25 MHz. It is equipped with features such as wide frequency range, low power consumption, good linearity, and excellent temperature and voltage stability. The device has a wide range of applications in communication systems, audio processing, test and measurement equipment, as well as medical devices. The working principle of the VCO consists of its oscillator, logarithmic amplifier, voltage control block, and feedback loop, which keeps the oscillation frequency of the device stable.

The specific data is subject to PDF, and the above content is for reference