DSC1121CM2-008.0000T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	22mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	35mA
Operating Temperature:	-55°C ~ 125°C
Series:	DSC1121
Voltage - Supply:	2.25 V ~ 3.6 V
Output:	CMOS
Function:	Enable/Disable
Frequency:	8MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DSC 1120CM2-008.0000T is a member of the popular oscillator family of oscillators. It is an oscillator-type oscillator consisting of a quartz crystal and two feedback components. These oscillators are often referred to as “profiled oscillators” because they can be adjusted to produce a specific frequency output. These versatility makes these oscillators ideal for many electronic applications that require a specific frequency or waveform output.

Application Areas

The DSC 1120CM2-008.0000T is most commonly used in digital signal processing (DSP) systems, computer peripherals, and medical imaging systems. It is used to generate a specific clock or timing signal for these applications. It can also be found in many other consumer electronics such as radio receivers, satellite receivers, and CD players.The primary advantage of DSC oscillators is their small size and low power consumption. This makes them ideal for using in devices where size and power consumption must be kept to a minimum.The DSC 1120CM2-008.0000T can also be found in industrial automation and power control systems. The oscillator helps to ensure precision in control systems, such as those that regulate temperature, pressure, or motor speed.

Working Principle

DSC 1120CM2-008.0000T oscillators work by using a quartz crystal as a feedback component. The quartz crystal vibrates at a specific frequency when an electrical current is applied to it. This vibration is then amplified and used as a reference signal for the output of the oscillator.The two feedback components of the oscillator are the damping resistor and the quartz crystal. The damping resistor serves to keep the circuit from destabilizing while the quartz crystal serves as the reference signal. The combination of these two components allows the oscillator to maintain its output frequency over a wide range of temperatures and relative humidity.

Conclusion

The DSC 1120CM2-008.0000T is a member of the oscillator family of oscillators. This oscillator-type oscillator is used in many applications such as digital signal processing, computer peripherals, and medical imaging systems. It also finds use in many consumer electronics. The primary advantage of DSC oscillators is their small size and low power consumption. The oscillator works by using a quartz crystal as a feedback component and two feedback components as a reference signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description