DSC1123CE1-050.0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are an essential part of today’s electronics. They are mainly used in radio communication, signal processing, and communication systems. There are many different types of oscillators and the DSC1123CE1-050.0000 is one of them.

This oscillator is a voltage-controlled oscillator (VCO) that operates between 5MHz to 50MHz with a control voltage of 0 to 5.0V. It has a phase noise of -122dBc/Hz at 1MHz offset and is designed for use in communication systems such as Wi-Fi and Bluetooth. In terms of power consumption, it requires a supply voltage of +3V with a consumption of approximately 2mA.

The DSC1123CE1-050.0000 is primarily used in radio frequency applications such as portable radios, Wi-Fi and Bluetooth. It is also suitable for applications like GPS and security systems. The most common application for this oscillator is circuit design. It can be used to generate clock signals for digital devices and provide reference clock signals for control systems.

The working principle of the DSC1123CE1-050.0000 is based on the principle of generating electrical waves. It consists of an amplifier and an oscillator. The amplifier is used to amplify the input signal which is then used to drive the oscillator. The oscillator produces an electrical signal with a frequency that is dependent on the input signal. The output of the oscillator is usually in the range of 5 to 50MHz and can be controlled by varying the input voltage.

The DSC1123CE1-050.0000 is designed for use in high-speed applications such as wireless communication systems. It is also used for general-purpose applications such as measurement and control systems. The oscillator is designed with low phase noise and is suitable for use in applications that require high signal-to-noise ratio.

In conclusion, the DSC1123CE1-050.0000 is an oscillator that is designed for use in high-speed applications such as radio communication and signal processing. It is suitable for applications that require a high signal-to-noise ratio and generates electrical waves with a frequency of 5MHz to 50MHz. The oscillator works on the principle of generating electrical waves using an amplifier and oscillator, and its output can be controlled using a voltage input.

The specific data is subject to PDF, and the above content is for reference