DSC400-1111Q0019KI2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are a type of oscillator, which is used in a variety of applications to generate and control oscillations, including frequency synthesis, voltage control and clock synthesis. The Oscillator of type DSC400-1111Q0019KI2T is an advanced, highly reliable and cost-effective solution for the demanding requirements of electronic systems.

The DSC400-1111Q0019KI2T is designed to provide an electrical oscillation signal with a wide range of parameters, such as frequency, frequency tolerance, and output waveform. It is available in four different configurations, which can be programmed for use in different applications. The oscillator can be programmed by selecting the desired parameters via four solderable pins.

The four programming pins of the DSC400-1111Q0019KI2T are: Frequency Selection (FS), Frequency-Tolerance Selection (FTS), Voltage-Sensitivity Selection (VSS) and Output Waveform Selection (OWS). The selection of the parameters for the oscillator is done by setting the appropriate combination of logic levels on these pins. When the desired settings are taken, the oscillator will start to oscillate at the requested frequency with the correct output waveform.

The applications of the DSC400-1111Q0019KI2T include automotive, industrial and medical applications where the reliable and precise frequency generation of the oscillator is essential. It can be used in many applications such as communication systems, automotive electronics and robotics, electromechanical systems and frequency counting. In addition, the oscillator can be used in phase-locked loops and frequency control systems.

The key features of the DSC400-1111Q0019KI2T include a wide in-circuit programmable operating frequency range of 0.8 to 38 MHz, low phase jitter, wide frequency-tolerance range of 0.5% to ±3%, low current consumption of 1.5 mA, fast start-up time of 10 ms, and high reliability. It includes an integrated voltage regulator for precise supply voltage control and an on-chip crystal for short-term stability.

The working principle of the DSC400-1111Q0019KI2T oscillator is the same as any other oscillator. It uses the oscillating signal produced by an LC circuit (inductance and capacitance) to control the output signal’s frequency and amplitude. The oscillation frequency is determined by the values of the inductance and capacitance and the amplitude is controlled by a steady current, which is supplied by an external power source. The oscillator also utilizes feedback mechanisms to minimize the current consumption and ensure precise and repeatable frequencies. The output signal of the oscillator is then used in the desired application.

In conclusion, the DSC400-1111Q0019KI2T is a highly reliable, cost-effective and advanced pin configurable/selectable oscillator. It can be used in a wide variety of applications that require frequency generation, frequency synthesis, voltage control and clock synthesis. With its wide range of programming options and its low power consumption, the DSC400-1111Q0019KI2T is a versatile and reliable oscillator for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference