DSC400-2222Q0105KE1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are used to generate a wide range of accurate and reliable frequencies. Their ability to generate an exact frequency makes them invaluable in a variety of applications. The typical oscillator circuit consists of a resonator, an amplifier, a frequency divider and a reference source. The DSC400-2222Q0105KE1 is a versatile pin configurable/selectable oscillator that can be used in a wide range of applications.

The DSC400-2222Q0105KE1 is a low-frequency oscillator, which can be easily configured to provide frequencies from 0.1 to 500 MHz. It is designed to be used with an external controller such as a microcontroller, a digital signal processor, or a microprocessor. The oscillator can be configured to operate in one of three modes – up-down counting, nominal phase, and selectable phase. The oscillator can also be programmed for reset functions and for triggering of an external interrupt.

The DSC400-2222Q0105KE1 is designed to provide high accuracy, stability and reliability. It is powered by a 3.3V supply and has a maximum output current of 3.1mA. It also incorporates a low jitter clock source, which can provide frequencies up to 240MHz. It is designed to be used in applications such as clock distribution, signal processing and test equipment.

In terms of functionality, the DSC400-2222Q0105KE1 provides a range of different adjustable frequency outputs. These can be chosen by adjusting the input voltage to the oscillator. The oscillator is also capable of providing a variety of different output waveforms, including sine, square and triangle. The output waveforms can also be configured to operate in either a pulsed or steady-state mode.

In terms of its working principle, the DSC400-2222Q0105KE1 has a differential oscillator circuit, which consists of two operational amplifiers and a parallel-connected resonator. The oscillator circuit is powered by a voltage source, which sets the frequency. The output of the oscillator is then obtained by connecting the two operational amplifiers in the differential oscillator circuit.

The oscillator circuit consists of two inverting amplifiers, each of which is biased to a different voltage. The output of the amplifier is then passed through a frequency divider. The output of the frequency divider is then connected to an appropriate reference source, such as a crystal oscillator, to generate the desired output frequency.

The output frequency can be changed by adjusting the bias voltages of the two amplifiers. The duty cycle and the square waveform of the output signal can also be adjusted by connecting the two amplifiers in a different fashion. The duty cycle and the shape of the output waveform can also be altered by changing the values of the components in the frequency divider circuit.

The DSC400-2222Q0105KE1 oscillator is a versatile and reliable solution for a wide range of clock distribution, signal processing, and test equipment applications. Its ability to accurately generate and regulate frequencies allows it to be used in a variety of applications and its differential oscillator circuit provides a range of adjustable frequency outputs.

The specific data is subject to PDF, and the above content is for reference