DSC400-2222Q0118KE2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin configurable and selectable oscillators are an important set of oscillator products that can create different frequencies and waveforms using pin configuration and selection. This allows the use of the oscillator in a wide range of applications. The DSC400-2222Q0118KE2T oscillator is a unique device, capable of producing both frequency and waveform changes.

The DSC400-2222Q0118KE2T contains five pins that enable the user to configure the frequency, amplitude and waveform of the oscillator. The four select pins (A2, B2, A3, B3) are used to select either a sine wave, triangle wave or a triangle wave/sine wave combination. The selection pins (A1, B1) enable the selection of the frequencies available on the device, ranging from 1 Hz to 22 MHz. The remaining pin is a digital enable pin that can be used to enable or disable the oscillator.

The device is a low power oscillator that is used for frequency and waveform modulation, communication, data processing and instrumentation. It is used in applications such as digital electronic systems, devices, transmitters, receivers, clock circuits and power supplies. The oscillator also has low ripple, low jitter, low skew and stand-by current. This allows it to be used in high performance applications that require precise control of frequencies and waveforms.

The DSC400-2222Q0118KE2T provides a lot of flexibility in terms of configuring and selecting frequencies and waveforms. It is easy to use and the device can be quickly and easily changed to create different frequencies and waveforms. This makes it an excellent choice for applications that require precise control of frequencies and waveforms.

The working principle of the oscillator relies on the operation of the select pins. Upon selecting the desired frequency, the oscillator begins adjusting the frequency and waveform of the signal. The select pins control the output of a triangular wave or the combination of a triangular wave and sine wave. This combination of signals creates a frequency and waveform that can be adjusted with the select pins. The digital enable pin is used to enable or disable the oscillator. By changing the output of the digital enable pin, the user can control the output of the oscillator.

The DSC400-2222Q0118KE2T provides a lot of flexibility and is an ideal choice for a variety of applications. It is a low power oscillator that enables precise control of frequencies and waveforms for digital electronic systems, devices, transmitters, receivers, clock circuits and power supplies. This makes it a great choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference