DSC400-3133Q0080KI1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators contain a specific type of quartz crystal resonators, known as AT-cut oscillators. These quartz oscillators feature a wide range of input, output, enable/disable, load capacitance, and temperature options. The DSC400-3133Q0080KI1 is a Pin Configurable/Selectable Oscillator provided by Ecliptek Corporation that covers a wide range of configurations and options.

The DSC400-3133Q0080KI1 offers a frequency range of 8 to 135MHz, with stability options spanning from smaller than plus/minus 25ppm to larger than plus/minus 100ppm. The supply voltage ranges from 1.8v to 3.3v, with a current consumption of 12mA. The package used is a 4-pin PDIP, with a maximum operating temperature of 70 degree Celsius.

The DSC400-3133Q0080KI1 offers various options as to input and output type, as well as enable/disable capability. The input source can either be a TTL/CMOS compatible signal or an analog signal from a phase-lock loop. The output types can be either TTL, differential or low voltage differential (LVCMOS). There is also an option for a 2x clock option. The DSC400-3133Q0080KI1 has an enable/disable feature that can allow it to switch between active and standby states, thus reducing power consumption.

When it comes to the working principle, the DSC400-3133Q0080KI1 features a quartz crystal resonator with a pre-defined resonant frequency. The quartz crystal is a very stable and temperature resistant medium that allows for precise and accurate frequency management. The DSC400-3133Q0080KI1 also has an oscillation circuit that is based on the Pierce Oscillator topology. The Pierce Oscillator uses two transistors (NPN/PNP) to drive a parallel resistor-capacitor network. The feedback from the collector of one transistor provides the input required to oscillate the circuit. This feedback is used to drive the circuit and therefore, create an oscillation at the desired frequency. This oscillation frequency is the one set by the quartz crystal resonator.

The DSC400-3133Q0080KI1 can be used in various applications due to its wide range of frequency, supply voltage, temperature and stability options. It can be used in clock/timing circuits, communication systems, sensing and instrumentation applications, broadcast systems, and systems that require accurate frequency management.

In conclusion, the DSC400-3133Q0080KI1 is a pin configurable/selectable oscillator manufactured by Ecliptek Corporation. It has various options when it comes to input/output type and enable/disable, as well as a wide frequency range, high stability options and low consumption. The working principle is based on the Pierce oscillator topology, with a quartz crystal resonator allowing for precise and accurate frequency management. The DSC400-3133Q0080KI1 can be used for many different applications due to its versatile nature.

The specific data is subject to PDF, and the above content is for reference