DSC557-0333SI1T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used in a variety of applications to generate a stable frequency as an output signal. One of these oscillators, DSC557-0333SI1T, has been specifically designed for precision applications, such as timing and timing-critical systems, frequency measurement, and waveform stability. It has an ultralow phase noise of -118 dBc/Hz at 100 kHz and a wide frequency range of 0.25 to 85 MHz, which makes it an ideal choice for demanding applications. This article will discuss the application field and working principle of the DSC557-0333SI1T oscillator.

The main use of DSC557-0333SI1T is in precision timing and timing-critical systems. It provides a stable frequency output, with very low phase noise (better than -118 dBc/Hz), which makes it suitable to be used as a clock source in mobile communication systems, and also in other precision timing and timing-critical applications. In addition, it also features a wide frequency range of 0.25 to 85 MHz, which makes it suitable for frequency measurement applications. Moreover, it also has excellent long-term stability and accuracy, which makes it an ideal choice for applications such as signal generation, waveform stability measurement, and phase-locked loops (PLLs).

The DSC557-0333SI1T oscillator also has excellent reliability and thermal stability. It has a temperature coefficient of 0.2 ppm/°C, which ensures that its output frequency is not affected by any temperature variation. Moreover, it has a wide supply voltage range of 1.7V to 4.375V, and a wide operating temperature range of -40°C to +85°C. These features make it suitable for use in a variety of environments.

The working principle of the DSC557-0333SI1T oscillator is based on the use of a differential voltage controlled oscillator (VCO) and a phase-locked loop (PLL) circuit. The VCO is used to generate a sawtooth waveform which is then divided by the PLL circuit and used as an output signal. The PLL circuit is used to control the frequency of the output signal, which is then compared to an external reference signal. This comparison is used to adjust the frequency of the output signal so that it is in line with the frequency of the reference signal. The PLL circuit also helps reduce the phase noise of the output signal.

In conclusion, the DSC557-0333SI1T oscillator is a precision oscillator designed for applications requiring high performance and accuracy. It has an ultralow phase noise of -118 dBc/Hz at 100 kHz and a wide frequency range of 0.25 to 85 MHz, making it an ideal choice for demanding timing and timing-critical applications. Moreover, it has excellent long-term stability and accuracy, as well as excellent reliability and thermal stability, due to its temperature coefficient and wide operating temperature range. Finally, its working principle is based on the use of a differential VCO and a PLL circuit.

The specific data is subject to PDF, and the above content is for reference