DSC6112MI2A-PROGRAMMABLE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are electronic devices used to generate time-based signals, such as square waveforms or sine waves. The DSC6112MI2A-PROGRAMMABLE oscillator is a common type of programmable oscillator. It is a subtypes of direct programmable oscillators and can be used for a range of applications.

The DSC6112MI2A-PROGRAMMABLE oscillator has a maximum frequency of 2.2 GHz. The maximum pre-divider ratio is 255, while the maximum counter setting is 20. It has three channels: one to control the frequency, a second to control the phase, and a third to control the start or stop of oscillations. It also has an output amplifier, which can be enabled or disabled.

The oscillator works by generating a clock signal. This clock signal is then sent to a divider circuit, which divides the clock frequency by a certain amount. This divided signal is then sent to a counter, which counts down from a certain value. When the counter reaches zero, it triggers the oscillator to reset and start again. In this way, the frequency of the oscillator is determined by the divider and counter settings.

The DSC6112MI2A-PROGRAMMABLE oscillator is ideal for use in applications that require a precise and stable oscillator signal. It can be used for precision timing in telecommunications systems, for frequency modulation in radio transmitters, for carrier wave generation for very low frequency (VLF) signals, and for triggering in oscilloscopes. It can also be used as a reference clock in digital systems and embedded applications.

The oscillator has two working modes: self-oscillation and external oscillation. In self-oscillation mode, the oscillator operates autonomously and the frequency is automatically adjusted based on the programmed settings. In the external oscillation mode, the oscillator operates in response to an external clock signal. In this mode, the oscillator syncs with the external signal and its frequency is determined by the external clock frequency.

The DSC6112MI2A-PROGRAMMABLE oscillator is a reliable and cost-effective solution for applications that require a precise and stable oscillator signal. It is easy to program, and its wide frequency range allows it to be used in a variety of different applications.

The specific data is subject to PDF, and the above content is for reference