DSF050J824

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are a special type of capacitor which uses flat plastic films as its dielectric. Their construction is similar to that of ceramic capacitors and paper capacitors, but they use plastic films as a dielectric medium instead of ceramic or paper. Compared to other capacitor types, film capacitors have a very low self-discharge rate and a very low leakage current, so they are ideal for situations where high capacitance is needed but a low impedance or low ESR is desired. The DSF050J824 is a film capacitor manufactured by Dyson’s Capacitor, a company that specializes in the production of various capacitors. The DSF050J824 is designed specifically for use in high-frequency switching applications. It has a capacitance of 0.1uF, and its ESR (Equivalent Series Resistance) is rated at 0.08ohm. It also has a maximum voltage rating of 630VAC, and its operating temperature range is -55°C to 105°C. The capacitor is designed to be used in high-frequency inverters, switching power supplies, power factor correction systems, and motor drives.Regarding the operating principle of the DSF050J824, it works in the same way as all other capacitors. When a voltage is applied to the terminals, an electric field is created between the two plates. This electric field creates a force which draws electrons from one plate and pushes them onto the other. This results in an accumulation of charge on each plate. The magnitude of the accumulated charge is determined by the capacitance of the capacitor. In the case of the DSF050J824, as the applied voltage increases, the charge also increases until the capacitor reaches its maximum rated voltage. In terms of its construction, the DSF050J824 is made up of two aluminum layers which are connected by a thin dielectric layer. The two aluminum layers form the two plates of the capacitor, and the dielectric layer provides insulation between the two plates. This insulation prevents the electric field from dissipating, which then allows the capacitor to store a large amount of charge. The dielectric layer is made up of a thin plastic film, which is why these capacitors are commonly referred to as film capacitors.In conclusion, the DSF050J824 is a film capacitor designed for use in high-frequency switching applications. Its capacitance is 0.1uF, and its maximum rated voltage is 630VAC. It is made up of two aluminum layers which are connected by a thin dielectric layer, and this allows the capacitor to store a large amount of charge. This makes the DSF050J824 an ideal choice for power factor correction systems, inverters, and motor drives.

The specific data is subject to PDF, and the above content is for reference