DSO1-20-0001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A common mode choke, or DSO1-20-0001, is an electronic component that is used to reduce common mode noise interference between electronic devices. It is commonly used in electromechanical applications such as in motor drive and power supply circuits. The choke works by providing a low-impedance path for unwanted alternating current (AC) signals, while allowing only necessary high-frequency signals that have needed inductance or resistance to pass through. The choke can be used in single-phase and three-phase circuits where common mode interference is prevalent.

The DSO1-20-0001 common mode choke is designed with a Toroidal core offering maximum low-frequency noise reduction, while allowing higher frequency noise signals to pass. The core is made of high-temperature resistant materials such as ferrite, phosphor bronze, stainless steel, or a combination of these metals. The core is wound with two sets of copper wires, with one set of wires connecting to the input of the device and the other set connected to the output. This winding creates an electric field which ensures that any unwanted AC noise is blocked from passing.

The working principle of the DSO1-20-0001 choke is that the winding creates a reactance that is inversely proportional to the frequency of the current, and therefore, higher frequency currents are virtually unaffected, while lower frequency interference is stopped before it reaches the device. Because of the choke’s low-frequency noise reduction properties, it is the preferred choice when designing AC power circuits or motor drives. The noise reduction also helps protect delicate electronic components in the circuits.

The application field of the DSO1-20-0001 choke is broad, as it can be used for many different electro-mechanical applications. It is commonly used in motor circuit designs, including those used in electric cars and aircraft. The choke can also be used to block AC noise between two circuits that are electrically connected, such as in the case of a voltage regulator. Additionally, the choke can be used to minimize the risk of ground-loop noise, which is common in audio systems.

The DSO1-20-0001 is a reliable and effective common mode choke that can be used in many different types of electromechanical applications. Its low-frequency noise reduction properties and high-temperature resistance make it the preferred choice when designing AC power circuits or motor drives. Ultimately, the DSO1-20-0001 common mode choke is an invaluable tool when it comes to ensuring signal integrity and protecting delicate electronic components from interference.

The specific data is subject to PDF, and the above content is for reference