Allicdata Part #: | DT250N2518KOFHPSA1-ND |
Manufacturer Part#: |
DT250N2518KOFHPSA1 |
Price: | $ 116.42 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Infineon Technologies |
Short Description: | SCR MODULE VDRM 1200V 410A |
More Detail: | SCR Module |
DataSheet: | DT250N2518KOFHPSA1 Datasheet/PDF |
Quantity: | 1000 |
3 +: | $ 105.83400 |
Series: | -- |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DT250N2518KOFHPSA1 modules are one of the types of thyristors – SCRs – Modules. SCRs, short for silicon control rectifier, are semiconductor devices commonly used in power control circuits or in any application that requires large amounts of current to be controlled such as motor speed control. SCRs are also known as thyristors and are similar to transistors, as they are both three-terminal electronic devices. However, SCRs are designed to be more robust and, therefore, need fewer components for larger current control applications. The DT250N2518KOFHPSA1 module is a three-terminal, solid-state protective device that offers reliable over-current protection for circuits up to 18A with a short-circuit withstand rating of up to 1500A.
The DT250N2518KOFHPSA1 module is a silicon controlled diac (SCD); a type of thyristor that provides protection against over-current conditions in applications that require a higher surge current stand-off capability than standard SCRs can provide. They are designed for use in equipment such as motor drives, AC motor control circuits, transformerless power supplies, high power rectifiers and inverters, and power supplies.
The DT250N2518KOFHPSA1 module is designed to minimize the current load on the circuit by reducing the conduction current and allowing the supply to remain at its nominal rating. The module will monitor the current in the circuit and turn it off if the current exceeds the loading limit. The two main components of the DT250N2518KOFHPSA1 module are a diac and a power switch. The diac is used to sense the current and the power switch is used to control the current in the circuit.
The working principle of the DT250N2518KOFHPSA1 module is very simple. The diac, which is basically a small, capacitive device, is used to sense the current in the circuit. As the current increases, the diac charges up until it reaches its breakover voltage, which triggers the power switch to shut off the current. The current then returns to its normal level, thus protecting the appliances in the circuit from overload.
The DT250N2518KOFHPSA1 module is a useful device for various industrial applications. It can be used in motor drives, AC motor control circuits, transformerless power supplies, high power rectifiers and inverters, and power supplies. With its excellent protection against over-current conditions, it ensures the safety of the appliances and equipment in the application. Additionally, its robust design requires few components and reduces the amount of load put on the circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DT250N2518KOFHPSA1 | Infineon Tec... | 116.42 $ | 1000 | SCR MODULE VDRM 1200V 410... |
DT250N20/14KOF | Infineon Tec... | 103.11 $ | 1000 | SCR MODULE 1.4KV MODULESC... |
DT250N20/16KOF | Infineon Tec... | 103.11 $ | 1000 | SCR MODULE VDRM 1200V 410... |
DT250N25/16KOF | Infineon Tec... | 109.56 $ | 1000 | SCR MODULE VDRM 1200V 410... |
DT250N16KOFHPSA1 | Infineon Tec... | 97.87 $ | 1000 | SCR MODULE 1.6KV MODULESC... |
SCR MODULE 4200V 2820A DO200AESCR Module...
SCR MODULE 3800V 700A MODULESCR Module 3...
SCR PHASE CTRL MOD 2000V 1000ASCR Module...
MODULE DIODE 230A MAGN-A-PAKSCR Module 1...
MOD THYRISTOR/DIODE 2000V Y1-CUSCR Modul...
SCR MODULE 1900V 300A NONSTANDSCR Module...