DT61N25/16KOF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of semiconductor switching device which can control large amounts of power. They are the most commonly used semiconductor switches in various industrial applications. A thyristor consists of a three-terminal device, typically with a gate or control terminal and two current terminals. The two current terminals are often referred to either as the anode terminal and cathode terminal, or as the terminal or main terminal. When a voltage is applied to the gate or control terminal, current flows between the main terminals, allowing the thyristor to be activated and allowing it to switch larger amounts of power than other semiconductor switching devices.

Silicon-Controlled Rectifiers (SCRs) are a specialized device within the thyristor family. They are mainly used to control the amplitude and direction of AC power. The two main terminals of the SCR are the Anode and the Cathode terminals and the third terminal is referred to as the Gate terminal. The SCR is a three-terminal device and when it is put in a circuit, it has a so-called "forward" bias. This means that the anode terminal is at a higher potential than the cathode terminal in the SCR.

The DT61N25/16KOF is a module that contains 16 Silicon-Controlled Rectifier (SCR) devices in a single package. The SCRs provide a high-current switching capacity and enable the control of AC power in both directions. The module can be used in applications such as motor control, power conversion, and power factor correction. The SCRs of this module are able to switch AC current up to 16A as well as have a very low on-state voltage drop. The module also has a variety of protection features such as thermal protection, over-current protection, and over-voltage protection.

The working principle of the module is to apply a specific voltage to the Gate terminal to turn on the SCRs. This voltage is usually provided by a control circuit. At the Gate terminal, the voltage must be greater than the voltage which is present at the Cathode terminal. When the Gate voltage is greater than the Cathode voltage, the SCRs will be turned on, allowing the current to flow between the Anode and the Cathode contacts of the SCR. Once the Gate voltage is removed, the SCRs will turn off, disabling the current flow between the Anode and the Cathode contacts.

The module can be used in various applications and is suitable for a wide range of DC or AC power control applications. The module is often used in motor control, power switching, and power factor correction applications. It is also used to provide over-voltage, over-current, and thermal protection in these applications. The module is ideal for high-power capability and low on-state voltage drop.

In conclusion, the DT61N25/16KOF is a module that contains 16 Silicon-Controlled Rectifiers (SCR) devices in a single package. It is mainly used for the control and conversion of AC power in both directions. It is a very versatile module that can be used in many different applications such as motor control, power switching, and power factor correction. Additionally, themodule provides various protection features such as thermal protection, over-current protection, and over-voltage protection. Therefore, it is ideal for a variety of DC or AC power control applications.

The specific data is subject to PDF, and the above content is for reference