DX1091/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DX1091/TR is an electronic panel indicator or pilot light designed for installation in housing construction with electrical enclosure according to IEC 529. It is suitable for both single phase and three phase systems up to 690V a.c. or 1000V d.c.

Inside the enclosure are a set of four LEDs (light emitting diodes). These LEDs are connected to the AC/DC current power supply which is routed through the panel and then to the LEDs. The LEDs themselves act as indicators for the power going to the panel. The indicators display information regarding the amount of current flowing and also the voltage present in the panel.

The LEDs will light up according to the amount of current present in the panel and the number of LEDs lit will indicate the levels of current being drawn. Red is used to indicate low voltage, yellow is used to indicate mid voltage and green is used to indicate high voltage. The LEDs are set up in a consistent fashion so that they can be easily interpretable by the user whether they are in the standard format or in a differently orientated format.

The LED indicator system can be used for a variety of applications such as monitoring the current and voltage in a panel, as well as to visually display the current status of an electrical system. This can be useful in detecting faults before they occur and can allow for quick remediation to prevent equipment or system damage.

The DX1091/TR is also designed for use in potentially hazardous locations. It has a UL94 type 4/4X flame rating, meaning that it is suitable for use in hazardous areas. It also has an IP55 rating, which means that it is protected against dust, water, and other harmful substances. The DX1091/TR is also designed with built-in lightning protection.

The DX1091/TR can also be used in conjunction with other control systems, such as programmable logic controllers (PLCs). It has single pole single throw (SPST) contacts that can be wired to a PLC in order to activate or deactivate circuits, based on the readings from the LEDs. This can provide a very flexible system for controlling the operation of the panel.

The DX1091/TR panel indicator is a very reliable product, and its simple design enables it to be used in a wide variety of applications. It is suitable for use in both hazardous and non-hazardous locations, and can be used in conjunction with other control systems. It is a versatile indicator and can be used to provide useful information to the user regarding the current and voltage in a panel.

The specific data is subject to PDF, and the above content is for reference