Allicdata Part #: | E-1048-8C5-C3D4V1-4U3-10A-ND |
Manufacturer Part#: |
E-1048-8C5-C3D4V1-4U3-10A |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | E-T-A |
Short Description: | CIR BRKR THRM 10A |
More Detail: | Solid State |
DataSheet: | E-1048-8C5-C3D4V1-4U3-10A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | E-1048-8C |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E-1048-8C5-C3D4V1-4U3-10A is a specific type of Solid State Relay amongst many options available for use in industrial automation, motor control, or local or remote switching applications. The most common type of Solid State Relay (SSR) includes four major parts, consisting of an input circuit, LED, output transistor, and the associated shape components. They have no moving parts, so are called "solid state." It is also a quiet and reliable way to switch, with no contacts that are prone to arcing.
The input control is the pathway by which the SSR receives an external signal to activate the SSR. This will generally be a voltage or current from the supply, such as 24Vac, or 1-5Vdc. This electrical input is used to power an input circuit, which then controls the firing angle of the LED (Light Emitting Diode). The LED is powered by the same electrical input as the input control. When the LED is energized, it releases light that is directed onto the output transistor, enabling the flow of an electrical current from the input circuit to the output circuit.
The E-1048-8C5-C3D4V1-4U3-10A SSR features an 8A maximum current rating and a 5mm pinpoint gap for operation. It operates from an AC input between 8 and 10 VDC, and has a response speed of 1-16ms, with a typical delay of less than 1ms, and maintains its ON/OFF state even after power is removed. It has a dielectric strength of at least 2000V and an insulation resistance greater than 100M ohms.
The E-1048-8C5-C3D4V1-4U3-10A has been designed primarily for use in many applications, such as industrial automation, motor control, local switching, and remote switching. It is very useful in automation, as it allows for the remote switching of devices, while still allowing for precise and reliable control. It can be used to control heaters, fans, monitoring devices, pumps, light fixtures, and much more.
The E-1048-8C5-C3D4V1-4U3-10A is incredibly reliable, with a low failure rate and a long service life. It can handle most general purpose loads, including Resistive, Inductive, and Capacitive loads. The SSR can also be used with a variety of safety circuits for added protection. It does not suffer from contact wear or welding, like electromechanical relays, so it can handle frequent and periodic switching.
To sum up, the E-1048-8C5-C3D4V1-4U3-10A SSR is a reliable and effective way to control a vast array of electrical loads. It offers accurate and precise control, and is easy to install and maintain. It can be used in a wide range of applications, including industrial automation, motor control, and local or remote switching. Its wide input range, fast response, and reliable performance make it an ideal choice for many different applications.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...