E13-01E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The E13-01E series limit switch is one of the many components manufactured by Omron Corporation to meet a variety of automation needs. Used primarily in industrial settings, these switches feature a variety of design functions that help achieve specific results. It is designed to open or close an electronic circuit when certain conditions are met, depending on its application and working principle.

The E13-01E series typically falls into the "snap action" limit switch category, meaning it has the ability to make or break an electrical contact without pressure or care. This is accomplished through the actuation of a mechanical arm that pivots or snaps open or closed when activated. Once the arm snaps open or closed, it holds the position until external forces actuate it again. This can be seen in a variety of applications such as elevators, docks, and conveyors, as well as in general industrial processes.

The key to a snap action control switch is the use of a spring-loaded mechanism to hold the arm in a certain position. This mechanism is usually a a coil spring, an armature, or a pivoting arm with a spring attached. The armature is usually magnetized which helps the armature maintain its position; the tension of the spring helps keep the armature in place as well.

The actuation of a snap action limit switch is generally initiated by electro-mechanical, pneumatics, or hydraulics principles. With electro-mechanical switches, electricity works against a spring to move the arm. The current is directed in upon initiation, and as the arm moves, it pushes against the spring to reach the point at which it will remain until the current is cut off.

Pneumatic and hydraulic switches, on the other hand, use compressed air or fluid, respectively, to move the arm. The air or fluid acts against an arm to move it from one position to another. Once the arm has moved to its desired position, the air or fluid needs to be released in order to deactivate the switch.

The E13-01E series limit switch also features a mechanical over-travel feature that prevents the arm from going further than its preset travel limits. This can be achieved through the use of a built-in stop, which limits the amount of motion in either direction, or a mechanical snap lock, which prevents the arm from moving beyond its desired position.

The E13-01E series limit switches are also capable of performing "closed-loop" control. This type of control allows the switch to monitor the conditions of the circuit in which it is installed in order to detect changes and actuate the switch accordingly. This is used in processes such as automatic conveying and sorting equipment and in process control systems.

Overall, the E13-01E series limit switch is a reliable and versatile component designed to meet the automation needs of a variety of industries. Its construction and operation make it suitable for a variety of applications and it is capable of operating under either electro-mechanical, pneumatically, or hydraulically actuated principles.

The specific data is subject to PDF, and the above content is for reference