E3B2-R5M4D-US-3

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The E3B2-R5M4D-US-3, also known as a rotary encoder, is a specialized sensor with a wide range of applications. This type of sensor specializes in monitoring rotary and linear position and movement. It is a component of an automated system, usually used to measure rotational speed and amount of movement. As a result, it can be used for many applications such as robotics, automotive, and electronic controls.

Applications

Rotary encoders are widely used in industrial applications where precise and accurate measurement is required. Common applications include motor control, robotics, aerospace, instruments, and factory automation. These sensors are used in applications that require high degrees of accuracy, such as robotic welding, print inspection, material handling, and automated positioning systems. Additionally, rotary encoders are used in the automotive industry for oscillation sensing, brake control, and the measurement of engine speed.In the medical field, rotary encoders are used in laboratory equipment, medical imaging devices, and analysis instruments. The sensors are also useful for controlling surgical robots and hand-held devices that allow surgeons to perform precise, remote manipulation.

Working Principle

The E3B2-R5M4D-US-3 is a specialized sensor that comprises a rotating component called a rotor and a stationary component called a stator. The rotor has a series of slots and protrusions that align with a corresponding sensor. As the rotor rotates, the protrusions pass by the sensor, causing the sensor to detect a pulse. Depending on the type of sensor, this pulse can represent linear position and/or velocity.The E3B2-R5M4D-US-3 rotary encoder operates using the principle of magnetic induction. Inside the encoder, a magnetic ring acts as a rotor, which induces a voltage in a stationary coil placed around the edge of the ring. This voltage, in turn, is detected by the sensor and converted into an electrical signal.

Types of Rotary Encoders

There are three main types of rotary encoders: optical, mechanical, and magnetic. Each type has its own unique set of characteristics and capabilities, which make them suitable for different types of applications. Optical rotary encoders are the most commonly used. They consist of a light source, a slotted disk, and a photo detector. As the slotted disk rotates, the light beam is interrupted, causing a series of electrical pulses to be generated.Mechanical rotary encoders function similarly to optical encoders, but they use physical contact instead of light. Mechanical rotary encoders consist of a continuous circular track and a wiper arm. The wiper arm reads the position of the encoder relative to the track as it is rotated.Finally, magnetic rotary encoders are the most advanced type, and they are more accurate and reliable than the optical or mechanical counterparts. They use a Hall Effect sensor to measure the movement of a magnetic field. As the rotor is rotated, the changing magnetic field causes a voltage to be induced in the sensor, which then generates an electrical pulse.

Conclusion

The E3B2-R5M4D-US-3 rotary encoder is a specialized sensor used in a variety of applications. It is composed of a rotor and stator, and it operates using the principle of magnetic induction. There are three main types of rotary encoders—optical, mechanical, and magnetic—each with its own unique set of characteristics and capabilities.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description