E52-CA15A-1.6-4M

Series:	E52
Part Status:	Obsolete
Element Type:	K - Type
Temperature Range:	0 ~ 1050°C
Length - Lead Wire:	13.123' (4m)
Conductor Type:	Non-Grounded
Terminal Type:	Exposed Lead Wires
Length - Protective Tube:	150mm
Diameter - Protective Tube:	1.6mm

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors - Thermocouple, Temperature Probes The E52-CA15A-1.6-4M is a temperature sensor commonly used for industrial applications. It is widely used in temperature monitoring, control and recording systems. This thermocouple consists of a wire pair consisting of two different metal wires joined together at either end. When one end of the wire pair is subjected to a temperature change, an electrical potential is created that can be measured at the other end of the wire pair. This voltage is known as Seebeck Voltage, named after Thomas Seebeck who first discovered the phenomenon. The E52-CA15A-1.6-4M is commonly used with temperature controllers and various types of displays. This is because of its ease of use and low cost. Many temperature controllers are designed to work specifically with this type of thermocouple, increasing the accuracy of the measurement and maintain a lower cost than other types of thermocouples. This type of thermocouple can measure temperatures up to 1400C (2600F). When using the E52-CA15A-1.6-4M, it is important to note that this type of thermocouple is intended to be used with a temperature controller. This is because the thermocouple needs to be connected to a voltage source to measure the Seebeck Voltage. The thermocouple must also be mounted securely in order to obtain accurate readings. In addition, the thermocouple must be isolated from vibration and shock, and should be installed in a manner that does not interfere with other components in the system. The working principle of the E52-CA15A-1.6-4M thermocouple is based on the Seebeck effect. This effect occurs when two materials are joined together at one end and exposed to a temperature difference between the two ends. This generates a direct current between the two points. The magnitude of the current is determined by the temperature differential between the two points, as well as the type of thermocouple material being used. The E52-CA15A-1.6-4M thermocouple is an economical and reliable temperature sensor for industrial applications. It is easy to install and use, and provides accurate measurements. The thermocouple must be used in conjunction with a temperature controller in order to achieve accurate readings. It can measure temperatures up to 1400C (2600F) and its measurement accuracy is ±1 to 2°C (1 to 3°F). Additionally, the installation and use of the E52-CA15A-1.6-4M thermocouple does not need to be complicated or time-consuming. With some basic instruction and proper installation, anyone can use this thermocouple for accurate and reliable temperature sensing.

The specific data is subject to PDF, and the above content is for reference