Allicdata Part #: | E52-IC75CD=4.8-ND |
Manufacturer Part#: |
E52-IC75C D=4.8 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | TEMPERATURE SENSOR |
More Detail: | J - Type Temperature Sensor 0 ~ 1050°C Non-Grounde... |
DataSheet: | E52-IC75C D=4.8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | E52 |
Part Status: | Obsolete |
Element Type: | J - Type |
Temperature Range: | 0 ~ 1050°C |
Length - Lead Wire: | -- |
Conductor Type: | Non-Grounded |
Terminal Type: | Enclosed Terminals |
Length - Protective Tube: | 750mm |
Diameter - Protective Tube: | 4.8mm |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E52-IC75C D=4.8 temperature sensors are designed for the measurement of low temperatures, for both industrial and general applications. They are thermocouples, meaning that they convert the temperature of a surface into an electrical signal. This signal can be used to monitor and control the temperature of a process.
The E52-IC75C makes use of the Seebeck effect to measure temperature, which is basically a form of thermoelectricity. Two different types of metal called thermoelements are used for this effect. When the two thermoelements are connected, an electrical potential is created due to the metal junctions. This potential is proportional to the temperature differences between the two thermoelements. The output voltage from the system is then amplified and used to measure the temperature.
This device is commonly used in industrial process control systems to measure temperatures ranging from -200°C to +300°C. They are accurate, reliable, and relatively easy to install and operate. In addition, they are less expensive than other temperature sensors and can be used in many different applications, such as HVAC systems, hot water systems, industrial process control, and so forth.
The working principle of the E52-IC75C temperature sensors is fairly straightforward. When a temperature difference is created between the two thermoelements, the electrical potential increases, which is proportional to the temperature difference. This electrical potential is then amplified and used as the output voltage of the sensing system. This output voltage can then be measured and used to automatically control the temperature of a system when coupled with a controller.
The E52-IC75C temperature sensors offer a good solution for temperature measurement in many industrial applications. They are very accurate, reliable, and easy to install and operate. They are also cost effective and can be used in a wide range of applications. In addition, they have a wide temperature range, making them suitable for use in a variety of different environments.
The specific data is subject to PDF, and the above content is for reference
THERMOCOUPLEK - Type Temperature Sensor ...
T-COUPLE TYPE J L=20CM Y-TYPEJ - Type Te...
T-COUPLE K L=35CM 4MK - Type Temperature...
TEMPERATURE SENSORK - Type Temperature S...
T-COUPLE K L=35CM 4M SUSK - Type Tempera...
THERMOCOUPLE JJ - Type Temperature Senso...