E63-10H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The E63-10H snap action, limit switch is a versatile contact device that is commonly used in numerous applications, including elevator, upmost machine and door contact applications. The switch acts as a control input device, allowing the operator to easily make adjustments or enable certain tasks to be performed. The switch is designed to have a simple and reliable structure, which allows it to withstand the frequent usage and mechanical shock of everyday use.

The E63-10H snap action, limit switch typically uses one or two open-frame contactors with spring-loaded arms and roller plungers creating a snap-action effect. The snap-action effect is created when the plunger engages the arm at a predefined point creating the snap-action motion. In the closed position, the contact arms are either pushed or pulled-in by the roller plungers, which are then secured into the corresponding contactor casing. The contact arms of the switch can be positioned either in the up or down position, depending on the number of plungers and contactors.

The working principle of the E63-10H snap action, limit switch is based on the spring-loaded arm and roller plunger, which cause the arms to "snap" back into position against a stop. The switch is activated when the operator pulls the arm back into position. The arm snaps back under the force of the springs, which then open the contact arms and set the switch to the "open" position. Once the springs have been released, the arm stays in the "open" position. The switch then remains in this open position until the operator pushes the arm back into position, which then compresses the springs and closes the contact arms.

The E63-10H snap action, limit switch is designed to initiate or interrupt an electronic circuit in a safe, reliable and repeatable manner. Common applications for the switch include elevator car door closure systems, ride protection systems, machine limit systems and access control systems. The switch is also commonly used for self-checking and monitoring systems such as gate protection and temperature control systems.

The E63-10H snap action, limit switch offers a reliable, cost-effective and easy-to-install solution for applications that require this type of switch. The switch is designed to withstand the daily abuse and mechanical shock associated with high-traffic environments. The switch has a small footprint and can be used in spaces with limited space availability. The switch is suitable for use in low power and low voltage applications. The switch offers a long service life and is highly reliable, making it an ideal choice for any installation where dependable operation is required.

The specific data is subject to PDF, and the above content is for reference