| Allicdata Part #: | CH389-ND |
| Manufacturer Part#: |
E72-40AT |
| Price: | $ 5.38 |
| Product Category: | Switches |
| Manufacturer: | ZF Electronics |
| Short Description: | SWITCH SNAP ACTION SPDT 10A 125V |
| More Detail: | N/A |
| DataSheet: |  E72-40AT Datasheet/PDF |
| Quantity: | 1000 |
| 1000 +: | $ 4.89038 |
| Ingress Protection: | -- |
| Mechanical Life: | -- |
| Electrical Life: | 6,000 Cycles |
| Operating Position: | 0.330" (8.4mm) |
| Operating Temperature: | -40°C ~ 85°C |
| Overtravel: | 0.035" (0.9mm) |
| Differential Travel: | 0.004" (0.1mm) |
| Pretravel: | 0.040" (1.0mm) |
| Release Force: | -- |
| Operating Force: | 300gf |
| Features: | -- |
| Series: | E |
| Termination Style: | Wire Leads |
| Mounting Type: | Chassis Mount |
| Actuator Type: | Round (Pin Plunger) |
| Voltage Rating - AC: | 125V |
| Current Rating: | 10A (AC) |
| Switch Function: | On-Mom |
| Circuit: | SPDT |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap action, limit switches, such as the E72-40AT, are electromechanical devices that sense the physical extremities of motion within a machine, work station, elevator, or door. They are used to detect the end-position of a moving object or to limit the travel of a valve or other movable part. In most applications, the switch is either opened or closed by an operator manually or by an automated shutter or limit controller.
The main components of the E72-40AT are the plastic housing, plunger, spring, contact assembly and mounting section. The length of the switch is just under 10 cm, and is designed to fit into tight spaces where length is an issue.
The operation of the E72-40AT is quite simple. When a mechanical force or pressure is applied to the switch, the plunger is forced against the spring, and the contacts are opened or closed, depending on the type of switch. When the force or pressure is released, the plunger is released and the contacts close again.
The E72-40AT is designed for a wide range of industrial applications, such as hoists, cranes, winches, elevators and other industrial machinery. It is also used in industrial safety systems, as a safety shutoff switch. In these applications, the switch monitors the motion of the machinery, and if it exceeds the preset limit it will open the contacts, shutting off the power to the machine.
The switch is also used in a wide variety of motion control applications, such as controlling the speed and acceleration of conveyor belts, as well as in automated door systems and lighting control.
The main advantages of the E72-40AT are that it is robust and reliable, and is designed for easy installation. The contacts are designed to open and close quickly and reliably even under high mechanical forces and extremes of temperature.
The E72-40AT is a robust, reliable and cost effective snap action, limit switch that is suitable for a wide range of industrial applications. Its simple operation and robust construction make it a popular choice for industrial safety and motion control applications.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V