EABS1J REG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are components which are used to provide power to circuits in the form of regulated direct current DC instead of AC.The EABS1J REG is one such device, and its application field and working principle is discussed here.

The EABS1J REG is a 4-pin surface mount device which can transmit electrical power in a regulated DC form, and is a type of Bridge Rectifier. The application fields it is generally used for include rectification in Power Supplies, AC adapters, solar power systems, and automotive equipment. Its working principle is based on the fact that whereas alternating current (AC) constantly changes in direction, the flow of direct current (DC) is in one direction only. The Bridge Rectifier uses diodes in order to convert AC current into a unidirectional flow, known as rectified or pulsating DC.

Regarding the actual device, each of the four pins on the EABS1J REG is connected to one of four diodes arranged in a bracket, or bridge, structure. This bridge is then put in series with the load that is being supplied with power. When an AC voltage is applied to the pins on the Bridge Rectifier from the power source, the current flows over two diodes in one direction and the other two in the opposite direction. The voltage that is established over each of the four diodes will depend on the voltage level of the power supply. The EABS1J REG also has an integrated Resistor, which helps prevent the component from overheating.

The figure below illustrates the arrangement of the diodes in the bridge rectifier component, and shows how the Resistor is also connected.

When a AC current input is applied, the Bridge Rectifier will take the positive and negative pulses of electricity and alternate the current to DC. The output of the EABS1J REG is adjusted to the same output level as the input. It will typically provide up to around 2.5A in current and 65V in voltage.

Another function of the EABS1J REG is to prevent signals which contain common mode noise, referred to as electromagnetic interference (EMI), from entering the DC power supply. This serves to help eliminate any potential interference that could otherwise be present in the power supply, and makes the component highly suitable for applications such as intercom systems, data and audio transmission systems, and medical equipment.

In conclusion, the EABS1J REG is a component which is used in a widerange of applications when a regulated DC supply is required. It is a type of Bridge Rectifier, comprising of four diodes with an integrated Resistor, and is capable of providing 2.5A in current and 65V in voltage. The EABS1J REG is also important in helping to prevent EMI from entering the DC power supply.

The specific data is subject to PDF, and the above content is for reference