ED104/3DS

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.8 Nm (7.1 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	Steel, Stainless
Contact Material - Plating:	Brass
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	-30°C ~ 105°C
Color:	Gray
Features:	--
Wire Termination:	Screw - Leaf Spring, Wire Guard
Series:	ED104/DS
Wire Gauge:	14-22 AWG
Voltage:	300V
Current:	15A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	3
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ED104/3DS Terminal Blocks are a reliable and cost-effective solution for effective and time-saving electrical wiring in industrial applications. It provides an efficient and secure connection of wires to the board. This type of terminal block ensures that the connection between two components is easy and safe. A typical ED104/3DS terminal block consists of a conductive terminal, a ferrule, an insulating bushing, a cover, and a connection clip. The terminal block is designed for use in industrial applications and is designed to resist corrosion and heat. The terminal block is made up of two layers of material, an upper layer and a lower layer. The upper layer consists of copper or brass, and the lower layer consists of insulated material such as plastic or rubber. The upper layer consists of two parts, a contact and a cap. The contact is the part that actually connects to the board and the cap provides insulation and protection to the connection. The contact is made of a conductive material such as copper or brass and the cap is made of a non-conductive material such as plastic or rubber. The lower layer consists of two parts, a contact and a bushing. The contact is the part that connects to the wires and the bushing provides insulation and protection for the connection. The contact is usually made of a metal material such as copper or brass and the bushing is usually made of a non-conductive material such as plastic or rubber.The connection clip on a ED104/3DS terminal block is made from a metal material such as copper or brass. It is designed to securely connect the wires and board together. The connection clip is then secured to the contact by the contact. The contact is then connected to the board by the ferrule. The ferrule secures the contact to the board and ensures a good connection. The cover on a ED104/3DS terminal block is usually made of a plastic or rubber material. It is designed to protect the connection from dust, dirt, and moisture. The cover also provides insulation and protection from interference and radio waves. The connection clip and cover are then secured together using a screw or bolt. The ED104/3DS terminal blocks are designed for use in many different applications such as industrial machinery, electrical components, and automotive wiring. The terminal block provides a secure and reliable connection between two components and is designed to resist corrosion and heat. The connection clip and cover provide insulation and protection to the connection and ensure a good connection between the components and board.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description