EDF1DS-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, widely used in electronic devices, are important components for controlling current flow. Bridge rectifiers are widely used in AC-DC applications and are formed by connecting four or more diodes in the form of a bridge. The EDF1DS-E3/45 bridge rectifier is a single-phase, three-pin bridge rectifier with a current rate of 45A and peak inverse voltage of 1000V.

The EDF1DS-E3/45 bridge rectifier uses a four-diode bridge configuration to create a full-wave rectifying circuit. Its two terminals are connected to the AC input while its other two terminals are connected to the DC output. The diodes act as a one-way switch, and the AC input passes through the two diodes at the same time. When the positive half-cycle of the AC input appears, the cathode of the conduction layer of the positive half-cycle is connected to the positive output line, while the anode is connected to the negative output line. The diodes act as a one-way switch, and for the negative half-cycle of the AC input, the anode of the negative half-cycle is connected to the negative output line and the cathode is connected to the positive output line. In this way, a full-wave rectification of the AC energy is achieved.

The EDF1DS-E3/45 bridge rectifier is suitable for high-current and high-voltage applications such as in motor drives, DC power supplies, UPS systems, and SMPS (switch mode power supplies). Since the bridge rectifier can handle large currents (45A) and peak inverse voltage (1000V), the power it supplies can be easily regulated and the quality of the output waveform is improved. It also enables accurate control of the output and improved efficiency.

Another advantage of the EDF1DS-E3/45 bridge rectifier is its superior thermal performance. Its efficient heat dissipation design supports up to 40A continuous current and peak power of around 400W, making it an ideal choice for many applications. It also has low power loss and low noise, which makes it better than other bridge rectifiers.

In summary, the EDF1DS-E3/45 bridge rectifier is a versatile single-phase bridge rectifier with a current rate of 45A and peak inverse voltage of 1000V. It is suitable for a wide range of high-current, high-voltage applications, and has superior thermal performance, low power loss, and low noise. This makes it an ideal choice for various circuit designs.

The specific data is subject to PDF, and the above content is for reference