Allicdata Part #: | Z5446-ND |
Manufacturer Part#: |
EE-SX3096-W11 |
Price: | $ 9.51 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SENSOR OPTO SLOT 3.4MM |
More Detail: | Optical Sensor Transmissive 0.134" (3.4mm) Module,... |
DataSheet: | EE-SX3096-W11 Datasheet/PDF |
Quantity: | 171 |
1 +: | $ 8.64360 |
5 +: | $ 8.46720 |
10 +: | $ 7.05600 |
25 +: | $ 6.52680 |
50 +: | $ 6.35040 |
100 +: | $ 5.46840 |
500 +: | $ 5.11560 |
1000 +: | $ 4.85100 |
Series: | -- |
Part Status: | Active |
Sensing Distance: | 0.134" (3.4mm) |
Sensing Method: | Transmissive |
Output Configuration: | NPN - Open Collector |
Mounting Type: | Through Hole |
Current - Supply: | 3.2mA |
Voltage - Supply: | 4.5 V ~ 16 V |
Response Time: | 3µs, 20µs |
Operating Temperature: | -25°C ~ 75°C (TA) |
Package / Case: | Module, Wire Leads, Slot Type |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical Sensors are devices that detect visible or infrared light. One type of optical sensor is a Photointerrupter or Slot-type optical sensor. An example is the EE-SX3096-W11. This device uses an infrared LED and a phototransistor housed together in a square, plastic shell mounted with a slot facing the infrared LED. This slot type sensor is capable of producing two-bit logic output signals from a single sensor.
The EE-SX3096-W11 is used in a variety of applications including industrial and commercial equipment. It is most commonly used in medical equipment, industrial control systems, life safety systems, and other automated equipment. In industrial environments, the EE-SX3096-W11 is used to detect presence, count objects, determine speed and direction, and measure distances.
The key component of the EE-SX3096-W11 is the infrared LED. When light from the LED passes through the slot, it is detected by the phototransistor and the two output signals are generated. The signal generated depends on the intensity of the light and will change when the light is blocked or reflected. By connecting the EE-SX3096-W11 to a control circuit, a logic output can be used to switch on and off devices such as motors.
The EE-SX3096-W11 is designed to operate in a wide temperature range of -25° C to +85°C. The device can be easily assembled with multiple types of mounting hardware and can be used in applications where sensitivity, speed of response and reliability are of primary importance.
In operation, the EE-SX3096-W11 emits a beam of infrared light which passes through the slot and is detected by the phototransistor. When the light is interrupted or blocked, the two output signals are generated. The signals produced depend on the amount of light blocked and can be programmed to switch on and off devices such as motors or other control systems.
The EE-SX3096-W11 is extremely reliable and suitable for a wide range of applications. The device is capable of operating in both digital and analog signals, making it an ideal choice for industrial and commercial applications. The EE-SX3096-W11 also provides a high level of detection performance and speed of response in most environmental conditions.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...