Allicdata Part #: | OR1093-ND |
Manufacturer Part#: |
EE-SX670P-WR 1M |
Price: | $ 26.89 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | OPTO SENSOR STD PNP 1MTR CBL |
More Detail: | Optical Sensor Transmissive 0.197" (5mm) Module, C... |
DataSheet: | EE-SX670P-WR 1M Datasheet/PDF |
Quantity: | 24 |
1 +: | $ 24.45030 |
5 +: | $ 23.33770 |
10 +: | $ 21.11510 |
25 +: | $ 19.44810 |
50 +: | $ 17.22550 |
100 +: | $ 16.66980 |
Series: | -- |
Part Status: | Active |
Sensing Distance: | 0.197" (5mm) |
Sensing Method: | Transmissive |
Output Configuration: | PNP - Open Collector |
Mounting Type: | Chassis Mount |
Current - Supply: | 30mA |
Voltage - Supply: | 5 V ~ 24 V |
Response Time: | 1ms |
Operating Temperature: | -25°C ~ 55°C (TA) |
Package / Case: | Module, Connector, Slot Type |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors have been widely used in many fields because of their many advantages. Among them, photointerrupter technology has been used for decades, and it still plays a big role in today\'s products. A form of photointerrupter technology is the Slot Type Photointerrupter that utilizes logic output signals, of which the EE-SX670P-WR 1M device is an example. This article will discuss the application field and working principle of this device.
The EE-SX670P-WR 1M is a slot type photointerrupter with logic outputs. It has a reasonable price, a long-lasting operational life, and a low on-resistance of 1.7 kΩ. With a package size of only 6.3x3.9x7.5 mm, the EE-SX670P-WR 1M is not only compact but also highly reliable. This makes it ideal for a wide range of applications, including home appliances, industrial equipment, vehicle speed sensors, electric door control, end of strip detectors, and even outdoor water-resistant systems.
In terms of the working principle of this device, the EE-SX670P-WR 1M is a sensor that uses an infrared light emitting diode (LED) attached to its detector or receiver. The receiver is connected to the logic output pins, which switch the device from low to high, or vice versa, depending on the configuration. When the sensor is energized, the infrared light emitted by the LED is blocked by any object that enters into the slots of the device. This will cause a change in the logic output signal, which can be used to trigger further processing or control of applications.
The EE-SX670P-WR 1M also features an auto-reset function. This allows the device to automatically reset itself after detecting an object or after the sensor loses power. This helps significantly reduce power consumption, increasing the device\'s operational lifetime. It is also very easy to install, requiring only basic wiring knowledge. This makes it suitable for use in installations with limited space.
In conclusion, the EE-SX670P-WR 1M is an ideal Slot Type Photointerrupter solution that uses logic output signals. It offers a reasonable price, a long-lasting operational life, and a low on-resistance of 1.7 kΩ. It is also highly reliable and easy to install. All these properties make the EE-SX670P-WR 1M suitable for a wide range of applications, such as home appliances, industrial equipment, vehicle speed sensors, electric door control, end of strip detectors, and even outdoor water-resistant systems.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...