EFD18F Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The EFD18F field effect transistor is a three-terminal semiconductor device that is commonly used as a switching device in medium voltage applications. It has a wide range of uses in industrial and consumer products, from controlling motor speeds to providing electrical feedback in instrumentation systems. Although often mistaken for a transistor, the EFD18F is actually a SCR (silicon-controlled rectifier)-a kind of thyristor or bidirectional switching device.

SCRs are basically an electronic switch system that make use of the forward-biased characteristics of a diode to provide a low-current controlling signal to operate the forward-biased channels of a semiconductor switch. A SCR consists of two layers of semiconductor material (n-region and p-region) separated by a thin ionized layer (junction) of insulating material known as a gate. The p-region gate region is connected to a positive voltage, and the n-region is connected to a negative voltage. The EFD18F is an example of a SCR that is built into a single module or device.

The EFD18F module is used to switch on a conduction path between two or three points even with a small signal current. It can also be used to switch off high-power electrical circuits, and is typically used in applications such as motor speed control, switching circuits, and automated systems. The EFD18F SCR module has an optically controlled silicon gate-a thin layer of material between an n-type and a p-type layer, allowing current to flow only when the gate is open. To open the gate of the EFD18F, an electrical signal is required.

The EFD18F module is built on a rugged, insulated, and self-shielding dielectric package that is designed to protect it from moisture, dust, and other contaminants. The device has a very low forward voltage drop and can handle up to 600 volts of peak voltage and 400 amps of peak current. The typical operating temperature range of the EFD18F is -40 degrees Celsius to +100 degrees Celsius.

When the device is switched on, it can remain on even if the control signal is removed. This feature is called latching, and is especially useful in applications such as motor speed control. The EFD18F has a low power consumption when in standby, and is also able to respond very quickly to control signals. The device can be triggered off again by a short pulse of the opposite polarity to the control signal, or by reducing the control signal to less than 20mA.

In addition to being used as a switching device, the EFD18F can also be used as an "over-current emergency cut-off switch," to protect circuits in the event of an over-current situation. The EFD18F module is also able to withstand higher voltage surges, making it ideal for applications in high-power, medium-voltage circuits.

The EFD18F module is an essential component in many electrical manufacturing applications. It is an efficient, reliable, and cost-effective device capable of safeguarding sensitive and highly powered electronic systems and controlling motor speed. Its ability to withstand higher currents and voltage surges makes it an invaluable part of many industrial and consumer products.

The specific data is subject to PDF, and the above content is for reference