Allicdata Part #: | 1798-1280-ND |
Manufacturer Part#: |
EK25B0012 |
Price: | $ 77.59 |
Product Category: | Kits |
Manufacturer: | Leader Tech Inc. |
Short Description: | ENGINEERING KIT - HIGH FREQUENCY |
More Detail: | Ferrite Cores - Cables and Wiring Kit 25 Pieces (1... |
DataSheet: | EK25B0012 Datasheet/PDF |
Quantity: | 19 |
1 +: | $ 70.53480 |
10 +: | $ 62.69950 |
25 +: | $ 51.72710 |
50 +: | $ 50.15950 |
100 +: | $ 43.88960 |
Series: | -- |
Part Status: | Active |
Kit Type: | Ferrite Cores - Cables and Wiring |
Quantity: | 25 Pieces (10 Values - Mixed Quantities) |
Mounting Type: | -- |
Packages Included: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Electromagnetic interference (EMI) can have a significant impact on the performance of an electronic device or system. To protect against EMI, filter kits are often used. Filter kits are designed to reduce the amount of EMI entering an electronic device or system, while still allowing useful signals to pass through with minimal interference. One such filter kit is the EK25B0012, which is designed to reduce EMI in low voltage devices.
The EK25B0012 is an ultra-low profile common mode filter for low voltage devices. It is designed to reduce conducted EMI and provide high-frequency filtering on both the input and output lines of these low voltage devices. The filter kit also provides ESD protection, common-mode/differential-mode filtering, and current limiting. This makes the EK25B0012 well-suited for use in applications such as motor controls, variable frequency drives, automated equipment, and other equipment that requires EMI protection.
The EK25B0012 uses a combination of passive components (such as capacitors and inductors) to achieve its filtering characteristic. The filter consists of two inductors, two capacitors, and two diodes in its most basic form. The inductors provide the high-frequency filtering, while the capacitors and diodes provide the low-frequency filtering. The filter also provides ESD protection by using the diodes to clamp the voltage on the input and output lines. The filter is designed to pass signals up to 1GHz with minimal interference, while suppressing EMI signals above this range.
In order to ensure good performance, the EK25B0012 must be installed correctly in the device or system. The filter should be connected between the power supply and the device, with the input and output lines connected as shown in the installation instructions. The filter should also be properly secured and mounted to the device or system to ensure that it does not become damaged during operation.
In conclusion, the EK25B0012 is an ultra-low profile common mode filter designed for use in low voltage devices. It is designed to reduce conducted EMI and provide high-frequency filtering on both the input and output lines. The filter consists of two inductors, two capacitors, and two diodes in its most basic form. The filter should be installed correctly in order to ensure good performance, and it should be properly secured and mounted to the device or system.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EK2503 | Synapse Wire... | 0.0 $ | 1000 | EVAL KIT FOR SNAP MESH NE... |
EK2505 | Synapse Wire... | 0.0 $ | 1000 | EVAL KIT FOR SNAP MESH NE... |
EK2550 | Synapse Wire... | 0.0 $ | 1000 | NETWORK EVAL KIT VERSION ... |
EK25B0012 | Leader Tech ... | 77.59 $ | 19 | ENGINEERING KIT - HIGH FR... |
EK2500 | Synapse Wire... | 187.14 $ | 1000 | KIT EVAL SYNAPSE SNAP POR... |
ENGINEERING KIT - WIDEBAND - SOLFerrite ...
SMT-COMMON MODE CHOKE SAMP PBCCommon Mod...
SMT EMI/RFI FILTER KITEMI/RFI Filters (L...
SMT EMI FLTR / FEEDTHRU CAP KITFeed Thro...
EMI FILTER KIT C TYPEFeed Through Capaci...
EMI FILTER KIT C TYPEEMI/RFI Filters (LC...