EL3021S1(TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, in general, are components that provide electrical isolation between two circuits. They use either LEDs or Photo Detector ICs to transfer signals across a non-conductive gap. More specifically, Triac, SCR Output Optoisolators are a type of Optoisolators that allow zero-cross detection, phase control, power reverse control, and current control with a P-channel output stage that is composed of a Triac and a SCR. One particular model of this type of Optoisolator is the El3021S1 (TB). 

The EL3021S1 (TB) is a zero-cross optically isolated AC/DC driver module with a built-in direct AC/DC power switch that is rated up to 240V AC at 40A DC. It can be used to control alternating currents with an input from a DC circuit. The EL 3021S1 (TB) draws power from the device it is controlling, so no external power supply is needed. 

The EL3021S1 (TB), being an optically isolated type of Optoisolator, provides electrical isolation between the input and the output devices by means of a photosensitive element. The input signal is typically a digital one, such as on/off signals from a control circuit. The input signal is then translated to an optical one using the photosensitive element which is converted to an electrical signal at the output. The output is then used to control the electrical device. This process is an example of logic level shifting. The EL3021S1 (TB) applies the logic level of the input signal to control the output device. 

The EL3021S1 (TB) is typically used in household appliances, such as kitchen stoves, pumps, fans, and electric heaters. It can also be used in other applications, such as solar controllers, ITE (Information Technology Equipment) power supplies, and other systems where zero-cross detection, phase control, power reverse control, or current control is needed. The optically isolated outputs of the module are designed to prevent interference between the input and the output, providing clean operation and reliability. 

In summary, the EL3021S1 (TB) is a Triac-SCR Output Optoisolator that provides zero-cross detection, phase control, power reverse control, and current control. It can be used in a wide range of applications, including household appliances, ITE power supplies, and other systems that require these features. It uses optically isolated outputs to provide clean operation and high reliability. 

The specific data is subject to PDF, and the above content is for reference