EL3010S1(TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components which use light to provide electrical isolation between two circuits. They are used in a variety of applications, such as high voltage, high frequency, and low voltage protection. The EL3010S1(TB) optoisolator is a triac- and SCR-output optoisolator, and it has numerous applications in industries that require efficient electrical isolation, such as automotive, communications, and medical equipment.Triacs are three-terminal semiconductor devices which are capable of controlling current in both directions, thus making them versatile devices for controlling AC power. SCRs (Silicon Controlled Rectifiers) are also three-terminal devices, and they are commonly used for controlling DC power. The EL3010S1(TB) optoisolator is able to control either type of power, making it suitable for a wide variety of applications.The EL3010S1(TB) optoisolator consists of an LED, or light-emitting diode, and a phototriac. The LED emits a light beam which is directed onto the phototriac, which is a device that is sensitive to light. As the LED is turned on and the light strikes the phototriac, the phototriac responds by turning on or off, depending on the type of current being controlled.When the EL3010S1(TB) optoisolator is used to control AC power, the LED is pulsed on and off at a given frequency, which causes the phototriac to turn on and off at the same frequency. The frequency of the LED’s pulses is controlled by the frequency of an AC power source. This allows the optoisolator to be used to precisely control an AC power source.When the EL3010S1(TB) optoisolator is used to control DC power, the LED is simply switched on and off via an external control signal, which causes the phototriac to switch accordingly. This allows the optoisolator to be used to precisely control the power output of a DC power source.The EL3010S1(TB) optoisolator is intended for use in numerous applications, such as motor and device control, solid-state relays, and lamp controllers. It is also suitable for use in hazardous locations, as it provides an additional level of electrical isolation that prevents hazardous voltages and currents from reaching sensitive components.The EL3010S1(TB) optoisolator is easy to install and can be operated in temperatures ranging from -40°C (-40°F) to 105°C (221°F). It is rated up to 500VAC/1A, and it has a maximum off-state voltage drop of 6V. The total isolation voltage is also rated up to 5200VAC, providing maximum safety in high-voltage environments.In conclusion, the EL3010S1(TB) optoisolator is a reliable and efficient triac- and SCR-output optoisolator which is suitable for a wide variety of applications, including those in hazardous locations. It can be used to precisely control both AC and DC power sources, and it can operate in temperatures ranging from -40°C (-40°F) to 105°C (221°F). With its maximum off-state voltage drop of 6V and total isolation voltage of 5200VAC, the EL3010S1(TB) is an excellent choice for industrial applications that require accurate and efficient power control.

The specific data is subject to PDF, and the above content is for reference