EL3032S1(TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators provide an electrical isolation between the input circuit and the output circuit, with the two circuits connected by an optical link rather than an electrical link. This ensures an electrical insulation between the two circuits, substantially increases safety and reduces electromagnetic interference. EL3032S1(TB) is a type of optoisolator which is specialized for triac or SCR output. This article is going to discuss the application fields and the working principle of EL3032S1(TB).

The EL3032S1(TB) is a 6-pin optoisolator integrating an LED and combined photodiode and SCR in one unit. It is available in through-hole and SMD packages so it is suitable for applications with PCBs. It operates over a wide temperature range of -40℃ to +85℃ and is ideal for use in industrial controls, consumer electronics, and small appliances.

The EL3032S1(TB) can switch a wide range of ac or dc loads including resistive loads, inductive loads, small artificial lighting, thermoelectric coolers and solenoid valves. It also has a wide isolation voltage range of up to 2500Vrms which offers better protection against electric shock. In addition, the EL3032S1(TB) has an active-low trigger input that is able to provide enhanced SCR triggering.

The working principle of EL3032S1(TB) involves two functional blocks. One is the LED light source which consists of an LED and a device to drive the LED. The other is the output part which consists of a combined photodiode and SCR. A current is applied to the LED, causing it to produce light. The photodiode in the output part is sensitive to light and is triggered by the light produced by the LED, allowing a small current to flow through the combined photodiode and SCR output part. This current triggers the SCR output part, allowing the current to be passed to the load.

To sum up, EL3032S1(TB) is a 6-pin optoisolator ideal for applications requiring electrical isolation between input and output circuits. It is suitable for switching a wide range of ac or dc loads including resistive loads, inductive loads, small artificial lighting, thermoelectric coolers and solenoid valves. EL3032S1(TB) works through an LED light source which triggers a combined photodiode and SCR output part, allowing current to be passed to the load.

The specific data is subject to PDF, and the above content is for reference