EL3H7(C)-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices that provide electrical insulation between two separate circuits. They are widely used in a variety or applications such as communications, computer peripherals, and industrial control systems. The EL3H7(C)-G is a type of optoisolator that is a Transistor, Photovoltaic Output type. This type of optoisolator uses a light emitting diode (LED) to control a photovoltaic type field-effect transistor (FET) in order to provide electrical isolation between two separate circuits.

The EL3H7(C)-G is a high-speed, low voltage optoisolator with a wide range of applications in the industrial, computer, and communication field. Its working principle is based on the use of an LED to transfer signals from one circuit to another. The LED emits photons when voltage is applied to its anode, which cause the FET gate to be charged when the photons hit the gate. This change in gate voltage turns the FET on, allowing signal current to flow from one circuit to the other.

The EL3H7(C)-G optoisolator is a very reliable device that offers high-speed data transfer between two independent circuits. It is designed for low-voltage applications, and operates at frequencies between 50 kHz and 10 MHz. This device is also highly integrated, allowing for increased design flexibility. Its output current ranges from 0.1 mA to 2 mA and its isolation voltage is 2.5 kV maximum.

The EL3H7(C)-G is well suited for many applications including motor control, communications systems, computer equipment, and industrial automation. It provides a high degree of electrical isolation between circuits and ensures reliable data transfer between them. The device is also highly compact and can be easily integrated into various system designs.

The EL3H7(C)-G is a reliable, high speed optoisolator with a wide range of applications in the industrial, computer, and communication field. This type of optoisolator uses an LED to excite a photovoltaic FET in order to provide electrical isolation between two separate circuits. Its isolation voltage is up to 2.5 kV and its output current can range from 0.1 mA to 2 mA. This optoisolator is designed to operate at frequencies between 50 kHz and 10 MHz. It is highly compact and can be easily integrated into many system designs.

The specific data is subject to PDF, and the above content is for reference