EL4093CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The EL4093CS is a differential amplifier module designed for high-resolution video applications. It has a wide gain range (101, 200, and 773) and can be used with a wide range of video signals, from NTSC to HD. The module contains three voltage amplifiers, one for each of the four high and low-level video input signals; a single reference level control and five gain controls that allow the amplifiers to be precisely tuned for each signal. The EL4093CS is capable of providing a low-to-high bandwidth of 50 MHz and an input impedance of 75 ohms.

The EN4093CS module is based on Linear Technology’s Video Amplifier architecture, which combines precision voltage gain and equalizer controls to provide both wide dynamic range and accurate signal processing. The module contains four externally accessible controls to precisely adjust the total gain and each of the four video amplifier gain blocks, allowing the amplifiers to be tuned to a wide range of signal levels and video formats. With the reference level control and the gain controls, the EL4093CS can be used in a wide range of video applications, from consumer to professional broadcast.

The EL4093CS is based on a single-supply CMOS differential amplifier architecture, which uses a low-noise amplifier to provide constant-gain amplification of the input signal. The differential amplifier design allows the various gain controls to adjust the gain of the amplifier over an extremely wide range, from 1 to 10 V/V (100 to 1000 mV/V). The gain control range can be increased to up to 20 V/V (700 mV/V) for high-gain video signals. The low-noise amplifier is highly stable and exhibits a high common mode rejection ratio (CMRR) of 60 dB typ at signal frequencies of 1 MHz or lower.

The EL4093CS has a number of features that make it ideal for video applications. It has a low-noise input current-feedback differential amplifier to provide a low-noise, wide gain range. It also has a fast slew rate of 10 V/µS, allowing it to support a wide range of video signals. The EL4093CS also features a unity-gain stable outputs, which are useful for applications that require very low-noise amplification of the input signals.

The EL4093CS module can be used in a wide range of applications, such as video multiplexers, cameras, monitors, and video editing systems. It is a robust, low-power consumption, wide-bandwidth amplifier module suitable for a variety of video-processing applications. It is suitable for a wide range of input signal levels, and its small size makes it ideal for portable video applications.

The specific data is subject to PDF, and the above content is for reference