DC Resistance (DCR):	1.7 Ohm
Height - Seated (Max):	0.547" (13.90mm)
Size / Dimension:	0.453" Dia (11.50mm)
Supplier Device Package:	Radial Lead
Package / Case:	Radial, Vertical Cylinder
Mounting Type:	Through Hole
Inductance Frequency - Test:	10kHz
Operating Temperature:	--
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	ELC11D
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	430mA
Tolerance:	±10%
Inductance:	1.5mH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Inductors are electronic components that store energy in a magnetic field when an electric current flows through them. The magnetic field is created by the current flowing in the wire windings. Fixed inductors are inductors with a fixed inductance that cannot be adjusted. The ELC11D152F is a type of fixed inductor. It is a high-current air-core inductor with 1.5mH of inductance. It is constructed with four wire-wound vertical layers, each layer containing three coils. It is a type of ferrite core material inductor, which offers higher saturation current and a lower DC resistance than other types of inductors. This inductor has a high self-resonant frequency, low turning loss and excellent temperature and humidity resistance.The ELC11D152F is suitable for high current applications such as DC/DC converters, LED lighting, power supplies and high power motor drivers. It is also widely used in switch mode power supplies (SMPS). This inductor can handle high current load of up to 10A and is rated for 500MHz frequency.The working principle of the ELC11D152F is based on Lenz’s Law, which states that the current induced in a wire coil is proportional to the rate of change of the flux linked with the coil by the coil’s magnetic field. When an alternating current is applied to this type of inductor, a magnetic field is created in the ferrite core material, which in turn creates a voltage in the inductor. This voltage is in opposition to the AC voltage, thus reducing the amplitude of the applied voltage. This process is known as inductive reactance, which is the process by which an inductor resists changes in the current by creating a voltage in the opposite direction to the applied voltage.In summary, the ELC11D152F is a type of fixed inductor which is suitable for high current applications such as DC/DC converters, LED lighting, power supplies and high power motor drivers. It is constructed with four wire-wound vertical layers and is rated for 500MHz frequency. This inductor works on the basis of Lenz’s Law, which states that the current induced in a wire coil is proportional to the rate of change of the flux linked with the coil by the coil’s magnetic field. The ELC11D152F offers higher saturation current and a lower DC resistance than other types of inductors, as well as a high self-resonant frequency, low turning loss and excellent temperature and humidity resistance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description