ELK-E103FA Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are commonly used in applications to reduce the level of electromagnetic interference emitted by electronic circuits and devices common in the vicinity of a product. Such filters are typically comprised of LC, or RC networks, and are designed to allow the desired signals to pass through, while attenuating the undesired signals that may cause interference. The ELK-E103FA is a high-quality EMI/RFI filter designed for RF applications where higher levels of attenuation are required. This article will provide an overview of the ELK-E103FA application field and working principle.

The ELK-E103FA EMI/RFI filter is a single-stage, fixed-frequency electromagnetic interference (EMI) filter with an integrated feedback resistor. It is designed to be used in circuit applications where a certain degree of EMI protection and noise rejection is required. It can be used for a variety of applications, such as signal conditioning, radio broadcasting, and power conversion. The ELK-E103FA filter can also be used for automotive systems, embedded systems, switching power supplies, and other high-frequency circuits. Bypass capacitors can be used to further reduce the EMI on a circuit board.

The ELK-E103FA EMI/RFI filter is composed of LC, or RC networks that are arranged in a certain configuration. The first LC circuit consists of an inductor and a capacitor connected in series. The inductor forms an LC circuit with the capacitor, which is also connected in series with the resistors. The two resistors form an RC network that is tuned to a specific frequency. The inductor acts as a low-pass filter, while the two resistors form a high-pass filter. The filter is designed to attenuate common mode noise at the tuned frequency, while allowing the desired signals to pass through with minimal loss.

The working principle of the ELK-E103FA EMI/RFI filter is based on the fact that different types of electronic components have different electrical characteristics. Different components sap up different amounts of energy when a signal passes through them. The LC and RC networks that make up an EMI filter are designed to reduce the level of interference, while still allowing the desired signals to pass through. This is accomplished by adjusting the values of the components in the filter circuit, as well as having a feedback resistor to make sure the filter is tuned for optimal performance.

In summary, the ELK-E103FA EMI/RFI filter is a high-quality filter designed for RF applications where higher levels of attenuation are required. It is composed of LC and RC networks and is designed to allow the desired signals to pass through, while attenuating the undesired signals that may cause interference. The filter works by having different components that sap up different amounts of energy when a signal passes through them. It is a single-stage filter with an integrated feedback resistor, and can be used for a variety of applications.

The specific data is subject to PDF, and the above content is for reference