ELK-EA102FA Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters, such as LC, RC, networks, are vital in controlling electromagnetic interference (EMI) and radio frequency interference (RFI) in a wide variety of electronic products. Generally, LC (inductance) and RC (resistance) networks are used to condition the signal for stable operation. ELK-EA102FA is often used in EMI/RFI filter applications, and it is a reactive component made up of Inductors and capacitors that have been designed to attenuate electromagnetic signals within a specific range.

ELK-EA102FA can operate in both low and high frequency ranges, depending on the user\'s needs. The low frequency range is typically used for simple EMI/RFI filtering in which the inductor\'s capacitance is used to limit signal gain or provide a damped frequency response. ELK-EA102FA can provide strong suppression up to 200 kHz for a wide range of signal frequencies. In high frequency range, ELK-EA102FA is used in applications such as RF attenuator, RFI filter, high frequency decoupling, and antenna tuning system.

The working principle of ELK-EA102FA is based on the premise that the inductors and capacitors are connected in a series circuit. The capacitors are used to provide a low impedance path to any high frequency signals which then passes through the inductors. This arrangement creates a filter that suppresses high frequency signals. The inductor\'s low impedance also provides some dampening on the signal, resulting in a less noisy signal.

ELK-EA102FA utilizes two types of network configurations: series inductor-capacitor (LCL) and parallel inductor-capacitor (LCP). Both these arrangements are effective in eliminating EMI/RFI noise, but the type of configuration used depends on the specific system requirements. If the EMI/RFI noise is below a certain frequency, the series inductor will attenuate the signals while the parallel inductor is better for frequencies above the specified threshold.

ELK-EA102FA is a great choice for EMI/RFI filtering in many applications since it is highly effective in controlling noise. The inductor-capacitor networks provide both low-pass and high-pass filtering, allowing the user to customize their system to meet the desired performance objectives. The combination of inductors and capacitors also provides an effective shield against EMI/RFI interference. ELK-EA102FA can be used in a wide variety of applications such as telecommunications, automotive, military, and medical products.

The specific data is subject to PDF, and the above content is for reference