ELM452(TA)-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output, have many different applications. One of the most versatile and widely used optoisolators is the ELM452(TA)-V. This type of device is a device with an integrated photovoltaic optoisolator which can be used as either an input optoisolator or an output optoisolator. The ELM452(TA)-V is a two-pin device with the photovoltaic output, a transistor control, and a voltage input. The output voltage can range from 0 to 30V, and the frequency response is 70MHz.

The ELM452(TA)-V application fields cover industrial, commercial, and aerospace areas. It is typically used in the control of microprocessor-controlled or electronic instrumentation applications. In these applications, it is important to have a reliable connection between the input and output circuit boards, while at the same time providing electrical isolation to protect the user from electric shock. The ELM452(TA)-V provides this type of protection by isolating the input from the output circuit.

That said, the ELM452(TA)-V has a wide range of uses, which include controlling electric heaters, LED, voltage transformers, and servos. It is also used in the protection of circuit designs from overvoltage and electrostatic discharge when used in the circuit protection of integrated circuits.

The working principle of the ELM452(TA)-V is based on a particular form of optoisolation. By using combination of an IR LED and a Photodiode, the optoisolator can interface an electronic circuit with a DC control voltage with optical isolation. The LED transmits an IR signal that is then received by the photodiode. When the photodiode detects the IR signal, it generates an electrical current. When the current is fed into the device, it receives a control voltage.

The basic structure of the ELM452(TA)-V optoisolator consists of a two-pin, single-connection device with two isolation paths. One path is connected to the input signal, and the second path is connected to the output circuit. An IR LED is contained within the device, which converts the input signal into an IR signal, which is then received by the photodiode, which then produces a current that is fed into the device.

The output voltage is then regulated by the current produced from the photodiode, which is controlled by the voltage applied to the input. The strength of the output voltage also depends on the current that is supplied to the optoisolator. The ELM452(TA)-V also has voltage overshoot protection and reverse voltage protection. This ensures that there is no damage to any components of the circuit when the input voltage is either too high or too low.

In conclusion, the ELM452(TA)-V is an ideal optoisolator for use in applications where electrical isolation is needed but a simple cost-effective solution is desired. TheELM452(TA)-V has an extended operational temperature range and works well in hostile environments. It also offers voltage overshoot protection and reverse voltage protection, as well as providing isolation between the input and output.

The specific data is subject to PDF, and the above content is for reference