ENC1J-D28-L00128

Series:	EN
Part Status:	Obsolete
Encoder Type:	Optical
Output Type:	Quadrature (Incremental)
Pulses per Revolution:	128
Voltage - Supply:	5V
Actuator Type:	1/8" Dia Round End
Detent:	No
Built in Switch:	No
Mounting Type:	Panel, PCB Through Hole
Orientation:	Vertical
Termination Style:	PC Pin
Rotational Life (Cycles Min):	10M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ENC1J-D28-L00128 Encoders

Encoders are electromechanical devices which measure the angular position or rotary velocities of an object or device. It gives electrical information about the angular position of the motor shaft, which can then be used to control the speed and position of the motor.

Application Field

ENC1J-D28-L00128 encoders are mostly used in robotics, such as in robots used for industrial and agricultural tasks. This encoder is also used in industrial process control and automation for accurate positioning. It is also utilized in navigation systems for directional measurements. In medical applications, ENC1J-D28-L00128 encoders are used to track the motion of wheelchairs, prosthetic limbs, and surgical instruments. The encoder is also used in the aerospace industry for high-precision control of aircraft, missile, and rockets.

Working Principle

ENC1J-D28-L00128 encoders use a combination of optics or magnets to measure angular displacement and velocity. The encoder has a built-in optical wheel that is mounted onto the motor shaft. This wheel has alternating light (opaque) and dark (transparent) lines which pass light sensors. The sensors are mounted on a circuit board that is connected to a motor drive. The alternating dark and light lines process through the light sensor then convert it into electrical signals. As the motor shaft rotates, the encoder measures the pulse rate of the generated electrical signals and is outputted to the motor drive. The motor drive then uses the data to calculate the speed and position of the motor shaft. The generated signals can also be connected to a controller or a control system for precise control and automation.

Advantages

ENC1J-D28-L00128 encoders have a long lifetime and are highly reliable, as they are capable of producing clear and consistent outputs. It also requires no calibration and easily installed onto the motor shaft. The encoder can efficiently measure small angular movements. In addition, the encoder has a high accuracy ratio of up to 90%. The signal generated by ENC1J-D28-L00128 encoders is unaffected by dust, dirt, chemical, and other environmental factors which makes it a good choice for harsh environments.

Conclusion

In conclusion, ENC1J-D28-L00128 encoders are electromechanical devices used for measuring the angular position and velocity of a motor shaft. Common applications include robotics, industrial process control, navigation systems, and medical equipment. It has a combination of optical or magnetic sensors and can easily output accurate and reliable readings. Its advantages include low maintenance, high accuracy, and robustness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description